Top Seller
STANDARD INDUSTRIAL CM SERIES 100
Location:
Port Orange, FL
Manufacturer:
STANDARD INDUSTRIAL
Model:
CM SERIES
Stroke:
6"

Specifications

Condition:
new
Stock number:
CM100-48-96
(note:
Does not automatically increase open height)
Stroke:
6"
Bed size:
96" 120" 144"
Ram size:
48"
Stroke 2:
8"
Stroke 4:
10"
Warranty:
5 YEAR
Bed size 2:
120" 144"
Open height:
14"
Forming tons:
100
Closed height:
8"
Open height 2:
16"
Open height 4:
20"
Punching tons:
66
Approx. weight:
49,000 lbs. 55,000 lbs. 65,000 lbs.
Forming tons 2:
200
Forming tons 3:
300
Forming tons 4:
400
Forming tons 5:
500
Closed height 2:
10"
Punching tons 2:
130
Punching tons 3:
200
Punching tons 4:
265
Punching tons 5:
330
Approx. weight 2:
60,000 lbs. 65,000 lbs. 80,000 lbs.
Approx. weight 3:
89,000 lbs. 100,000 lbs.
Approx. weight 4:
95,000 lbs. 110,000 lbs.
Approx. weight 5:
140,000 lbs. 178,000 lbs.
Speed approach-press-return:
127-22-163 in/min
Additional open height (note:
Does not automatically increase stroke length)
Speed approach-press-return 2:
107-20-139 in/min
Speed approach-press-return 3:
74-18-134 in/min
Speed approach-press-return 4:
127-18-98 in/min
Speed approach-press-return 5:
70-18-127 in/min
For press application and operation:
SEE ATTACHMENTS TAB

Description

ITEM: 100 - 500 Ton Straight Side Presses
MAKE: STANDARD INDUSTRIAL®
MODEL: CM SERIES
MODEL# CM100 / CM200 / CM300 / CM400 / CM500
Product Features
Standard Industrial is 100% Owned, Operated and Manufactured In The U.S.A
The model CM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model CM also allows full front to back off-center loading the entire width of the press bed. No other design of press will give you more tonnage over the bed area
The model CM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses. The CM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other
Our single cylinder design develops full tonnage anywhere along the bed left to right and front to back. The bellcrank linkage system is actuated with a single cylinder utilizing A660 bronze at the bearing points. These off the shelf material bearings are designed to withstand up to 6 times the machines overall tonnage and they are covered by our extensive 5 year parts warranty. The model CM is truly designed to accept virtually all forms of press applications whether it is punching, forming, blanking, coining, swedging, die tryout, trimming, drawing and so on. The CM is available up to 1,000 tons and particularly excels at progressive die set ups where you have varying amounts of tonnage being applied across the bed all in the same stroke
100% made in the USA with our unmatched 5 year parts warranty plus a lifetime of readily available parts all from your local suppliers. You will never have another "orphaned" machine due to an overseas manufacturer who can’t get you parts or a domestic manufacturer with proprietary parts that forces you to buy everything from them. With Standard Industrial you will always be able to get the part you need for the lifetime of the machine from any number of sources available to you
100% Made In the United States of America
All Components Readily Available From Your Local Suppliers
Hydraulic Oil cooler (fan radiator type)
Two hand controls for operator safety
ANSI B11.2 standards
Magnetic starter with over and under voltage protection with disconnect switch
JIC type electrical components in NEMA 12 enclosures
120 volt control circuit and 230-3-60 or 460-3-60 electrics through 40 h.p., for 50 h.p. and above 460 v. is standard
Counterbalance valve & Decompression system for punching/bottoming
Dependable Support from the people who make the machine
Typical 20-30 Year Lifetime
Hydraulic Tonnage Control
Full Tonnage throughout Stroke
(2) 5/8" t-slots in the bed and (2) 5/8" t-slots in the ram
5 Year Parts Warranty
5 Year Limited Onsite Labor Warranty
Lifetime telephone suppo