Top Seller
SHARP TMV/MP-2 / TMV-1/PM-2 10"
Location:
Port Orange, FL
Manufacturer:
Sharp
Model:
TMV/MP-2 / TMV-1/PM-2
Capacity:
Table travel 15.5” x 28”
Weight:
3,700 lbs.

Specifications

Condition:
new
Stock number:
TMV/MP-2
440v:
3KVA/7.5 amps
Table:
Working surface 10” x 50"
Taper:
R-8
Spindle:
Motor 3 HP
Taper 2:
NST #40
Accuracy:
0.0002" TIR
Capacity:
Table travel 15.5” x 28”
Warranty:
1 YEAR
Spindle 2:
Motor 5 HP
Capacity 2:
Table travel 15.5” x 34”
Ram travel:
18.5"
Head swivel:
360°
Knee travel:
15.3"
Run options:
Single step, dry run, graphics only, manual positioning.
Ram travel 2:
19"
Wiring voltage:
220/440v, 3 phase, 60 Hz
Quill feed (ipr):
0.0015”, 0.003”, 0.005"
Special features:
Custom pockets, repeat, rotate, mirror image.
Spindle to column:
9.8” - 28.3"
Approx. net weight:
3,700 lbs.
Speed (vari-speed):
60-4,500 RPM
Dimension functions:
Abs/inc, polar/cartesian, inch/metric.
Dimensions & weight:
Floor area (w x d) 70" x 75" x 88"
T-slot number, size:
3, 5/8"
Approx. net weight 2:
3,750 lbs.
Calculator functions:
Geometry, trig.
Dimensions & weight 2:
Floor area (w x d) 106" x 72" x 89"
Quill travel (z-axis):
5"
Spindle to nose to table:
"1.6 - 16.9"
Total power consumptions:
220V 3KVA/15 amps
Spindle to nose to table 2:
1-1/2” - 17”
Head tilt up-and-down (each way):
45°
Head tilt; right-to-left (each way):
90°
Head tilt; right-to-left (each way) 2:
45°
Subcategory:
Mills
Subcategory 2:
Vertical knee type

Description

ITEM: 10" x 50" CNC Knee Mills with 2-Axis ACU-RITE MILLPWR
MAKE: SHARP®
MODEL: TMV/MP-2 / TMV-1/PM-2
Product Features
FEATURES - TMV/MP-2
"Bridgeport-type" mill
CNC control by Acu-Rite and FAGOR for 2 axes and 3 axes
The 3rd axis is on the quill. Conversational programming allow easy operation of the machine without using G code
Millpower is a full – featured 2-axes control/3-axes readout with a number of software and hardware features
SOFTWARE
Dimension functions: Abs/inc, polar/cartesian, inch/metric
Programming
Program in/out, position/drill, mill lines, mill arc, blend (corner radius)
Holes (bolt circle, rectangular array, rectangular fram, line)
Circle (pocket, fram, ring), rectangle (pocket, frame, slot, facing)
Special features: Custom pockets, repeat, rotate, mirror image
Run options: Single step, dry run, graphics only, manual positioning
Calculator functions: Geometry, trig
HARDWARE
Operator console: Easy to use format. Conversational english. Three dimensional hard keys. 10” flat panel, color lcd display. Remote stop/go switch
Controller cabinet: Heavy duty enclosure modular construction, 486sx microprocessor. 115vac – 20 amps
Positioning: Precision glass scale linear encoders. Closed loop feedback through servo amplifiers. DC servo motors. Precision ground ball screws
STANDARD EQUIPMENT
Manual Draw Bar
Hardened and Ground Boxways
Front and rear way covers
Automatic Lube System
Tool Kit includes: Machine manual, Half nut wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, Flat head screw driver, Oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
FEATURES - TMV-1/MP-2
"Bridgeport-type" mill
CNC control by Acu-Rite and FAGOR for 2 axes and 3 axes
The 3rd axis is on the quill. Conversational programming allow easy operation of the machine without using G code
MILL PWR 2 axis CNC system by Acu-Rite
Digital Servo drive systems for X and Y axes travel
Precision-ground ballscrews with preloaded ball nut assemblies
3 axis (table, saddle, quill) digital readout system
Automatic lubrication system
Safety hand wheels
Machine features same as Models LMV, LMV-50, TMV, TMV-1
MILL PWR CNC SYSTEM FEATURES HARDWARE
10” flat-panel LCD display operator console
3-D, color keypad
RS-232 port
3-1/2" floppy disk drive
Emergency table stop button
Remote stop-go switch
SOFTWARE
User friendly conversational programming format. No prior programming experience is necessary
Standardized menus make it easy to program common features like lines, arcs, pockets, bolthole patterns, islands, spirals and ellipses. To add a feature to the program, simply press a function key and then follow the prompts
Perform complex calculations to solve geometry and trigonometry problems
Edit individual steps or merge whole or partial programs already created by using functions such as: Mirror/repeat/rotate, Explode, Reverse step, Reverse path, Change steps, Delete steps, Copy/move steps
Import geometry directly from a CAD file using the M