Top Seller
SHARP 22160B 22" x 160"
Location:
Port Orange, FL
Manufacturer:
Sharp lathes
Model:
22160B
Spindle Bore:
4.5"
Distance between Centers:
160"

Specifications

Condition:
new
Stock number:
22160B
Bed:
Bed Width 15-3/4"
Phase:
3 phase
General:
Spindle Motor (220V or 440V, 60, 3) 15 HP
Voltage:
220V; 440V
Capacity:
Swing Over Bed 22"
Carriage:
Cross Slide Travel 11.8"
Warranty:
1 YEAR
Tailstock:
Quill Travel (graduated) 6-1/2"
Bed length:
183"
Electrical:
Voltage 220 & 440
Head stock:
Spindle Nose Type D1-11 Camlock
Quill taper:
MT#5
Spindle bore:
4.5"
Compound width:
6"
Quill diameter:
3"
Standard color:
Gray
Swing over gap:
31", 12"
Taper of center:
MT#5
Threads & feeds:
Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
Inch threads (#):
2-56 tpi {44}
D.p. threads (36):
4-56 mm
Spindle speeds (12):
10-1,000 rpm
Compound rest travel:
7.8"
Net weight (approx.):
10,626 lbs.
Taper of spindle bore:
MT#7
Swing over cross slide:
13.2"
Distance between centers:
160"
Leadscrew pitch, diameter:
4 tpi, 1-1/2”
Cross feeds – in / rev {#}:
0.001 –0.0094” {17}
Metric and module threads {#}:
0.5-14mm {24}
Subcategory:
Precision

Description

ITEM: 22" x 160" Precision Lathe
MAKE: SHARP®
MODEL: 22160B
Product Features
These lathes are equipped with geared headstock, hardened and ground bed ways. Larger models are built on one piece casting bases for rigidity
The “B” models are equipped with D1-11 camlock spindle, 4.5” spindle bore. Other models are equipped with D1-8 camlock spindle, 3.1/8” bore
The spindle is mounted on 2 precision tapered roller bearings and one ball bearing. This triple bearing support system ensure accuracy and rigidity at all times
Handles that are used for engaging gears are built with locking pins to prevent the handles from being knocked out of place accidentally or under heavy cutting circumstances. Pulling the spring-loaded handle back and then shift does repositioning of handles
The universal gearbox design allows easy selection of inch and metric threading by just turning the lever to the assigned position instead of changing individual gears outside the headstock
A rotational style lever that results in less movement of the gears compare with the back-and-forth shifting style lever does selection of gears at the gearbox. Less movement of the gears means less wear and greater accuracy
The gapped bed design allows extra large work piece to be chucked at the spindle when the gap is taken out
Bed ways are induction hardened and ground for durability
Headstock gears are hardened and ground, made out of Chrom-Moly alloy steel for maximum wear
The headstock is equipped with a job button that allows inching movement of the spindle for easy engagement of gears
One shot lube system is installed in the apron to direct lube oil to all the sliding surfaces
STANDARD EQUIPMENT
4-jaw chuck (16” for B models)
Steady rest with bronze tip ( 3/4” - 9” )
Rapid traverse on carriage for models with center distance of 100” & over
Follow rest
Face plate (18”)
Coolant system
Splashguard
Chuck guard
American tool post
Halogen work light
Longitudinal carriage stops
Tool kit
Options/Accessories
PART # ITEM
803-2039 33 - Jaw Chuck 20" D1-11 (Bison) - 7.48” Bore
803-2539 3 - Jaw Chuck 25" D1-11 (Bison) - 7.60” Bore
853-1639 4 - Jaw Chuck 16" D1-11 (Bison)
853-2039 4 - Jaw Chuck 20" D1-11 (Bison)
853-2539 4 - Jaw Chuck 25" D1-11 (Bison)
3J15D11 3 - Jaw Chuck 15" D1-11 (BTC)
3J20D11 3 - Jaw Chuck 20" D1-11 (BTC)
4J16D11 4 - Jaw Chuck 16" D1-11 (BTC)
4J20D11 4 - Jaw Chuck 20" D1-11 (BTC)
4J25D11 4 - Jaw Chuck 25" D1-11 (BTC)
991126 Taper Attachment (Factory Installed)
2531-6064 Arbor- Jacobs
2425-7036 Drill Chuck – Jacobs (3/16" – 3/4" Capacity)
CA-2511-7350 Quick Change Tool Holder (Aloris) 7 pcs
10855 Live Center – Royal (Dual Bearing) MT#5
LC-MT5 Live Center – MT#5
CC-2680B 5C Lever Collet Closer
— Factory Installation - 5C Collet Closer
ACC-5C 5C Collet Set (1/8 to 1/16" x 1/16" 16 pcs
20C-02 Micrometer Carriage Stop
22C-STEADY12 Steady Rest 12"
22C-STEADY15 Steady Rest 15"
26C-RJAW Roller Jaws Set (3 pcs)
Digital Readout Systems
FG-22160 Fagor 20i D.R.O. (installed*)
AR-26160 Acu-Rit