Top Seller
BAILEIGH CS-350P 14" Manual Cold
Location:
Port Orange, FL
Price:
$5,325 USD
Manufacturer:
Baileigh saws
Model:
CS-350P
Motor:
4.0 / 3.0 HP
Weight:
834 lbs

Specifications

Condition:
new
Stock number:
CS-350P
Motor:
4.0 / 3.0 HP
Weight:
834 lbs
Operation:
Manual with Pneumatic Vise
Arbor size:
32 mm
Head miter:
90º Slotting, 45º Left / 45º Right
Head style:
Pivot
Vise style:
Dual Action, Self Centering
Blade speed:
Two Speeds — 26 RPM / 52 RPM
Head swivel:
90° 45°
Coolant system:
Yes
Capacity, square:
4.33" x 4.33" 3.5" x 3.5"
Slotting capable:
Yes, Left and Right
Dimensions (l/w/h):
60" / 44" / 48"
Capacity, rectangle:
4.33" x 3.5" 4.33" x 1.968"
Capacity, round tube:
4.331" 2.953"
Maximum vise opening:
6.5"
Capacity, round solid:
2.362" 1.968"
Maximum blade diameter:
14" (350mm)
Electrical requirements:
220 Volt, 3-Phase 60 Hz
Subcategory:
Circular cold saws

Description

ITEM: 14" Manual Cold Saw
MAKE: BAILEIGH®
MODEL: CS-350P
Product Features
Ever dream of having an extra hand to hold large awkward material when trying to close the vise on your cold saw? Well the CS-350P from Baileigh Industrial has taken care of that problem! The CS-350P is based from the CS-350M but adds a pneumatic closing vise to the equation. Tap the included foot pedal and the material is clamped and there is no need to worry if it is clamped tight enough, because the vise stays under pressure until the foot pedal is tapped again
The CS-350P cold cutting saw will fit well in any industrial environment and is designed to give years of trouble free use. Baileigh Industrial only uses the best component when building our cold saws. The CS-350P runs on 220 volt three phase power that allows the motor to spin at speeds of either 26 or 52 rpm. The choice of RPM is good because different types of material require different speeds for the best possible cut. The CS-350P also comes standard with the movable safety guard and a flood blade cooling system, ensuring safety and long cold saw blade life
The capacity on the CS-350P cold cutting saw is also impressive and can cut 4.25” round at 90 degrees. This machine can miter saw a total of 135 degrees - 45 degrees to the left and 90 degrees to the right for those jobs that might require slotting. The CS-350P is the perfect choice for all fabrication cutting jobs like marine rails, playground equipment, hand railing, and various chassis applications
MADE IN TAIWAN