Top Seller
SHARP V-1 12" x 58"
Location:
Port Orange, FL
Manufacturer:
Sharp
Model:
V-1
Capacity:
Table travel; x-axis 40"
Weight:
4,500 lbs.

Specifications

Condition:
new
Stock number:
V-1
Table:
Working surface 12" x 58"
Taper:
NST #40
Height:
100"
Spindle:
Motor (220/3/60) 5 HP
Accuracy:
0.0002" TIR
Capacity:
Table travel; x-axis 40"
Warranty:
1 YEAR
Ram travel:
17-3/4"
Knee travel:
16"
Wiring voltage:
220V; 440V
Quill feed (ipr):
0.0015”, 0.003”, and 0.006"
Wiring voltage 2:
220V / 440V, 3 Ph, 60 Hz
Approx. net weight:
4,500 lbs.
Dimensions & weight:
Floor area (w x d) 83” x 75”
T-slot number, size:
3 x 5/8" x 2-1/2”
Quill travel (z-axis):
5"
Saddle travel; y-axis:
16"
Speed (digital vari-speed):
70-4,000 RPM
Spindle gage line to table top:
2-18"
Head tilt up-and-down (each way):
45°
Head tilt; right-to-left (each way):
90°
Subcategory:
Mills
Subcategory 2:
Vertical knee type

Description

ITEM: 12" x 58" Heavy Duty Vertical Knee Mill
MAKE: SHARP®
MODEL: V-1
Product Features
12” x 58” table, 16” x 40” travel, 5 HP, #40, vari speed, box ways
SHARP milling machines are constructed from certified MEEHANITE castings that provides high rigidity and excellent vibration dampening characteristics. The models are equipped with hard chromed dovetail ways or hardened and ground box ways for superior wear resistance . For almost 30 years, the SHARP mills have been one of the most reliable mills in the industry
HEAD
The 5 HP motor is equipped with Digital Variable Speed drive that allows the change of spindle speed by simply turning a knob
The motor shaft and Vari Drive pulleys are dynamically balanced, then hard-chromed this allow a vibration free milling even at high speed
An oversized 4-1/8” diameter quill is used for heavy duty milling along with the #40 taper spindle
A matched pair of super-precision ABEC-7 angular contact bearings supports the spindle. The quill is CNC-ground to a mirror finish, and then chromed to fit the housing. Together, they insure spindle run out of no more than 0.00002” TIR
Beside swiveling 90 degree side to side, the head can also swivel up and down by virtue of a knuckle joint design. The new design developed by Sharp uses 6 bolts, 3 each side, that fitted into a circular T-slot milled at the inside of the over arm and secured by nuts from the outside. It secured the head tightly and offered high accuracy in milling operations
Column, Table and Knee
Hardened and ground box ways on column and saddle are used for extra rigidity
Power Feed Table and Saddle are installed standard
Certified MEEHANITE castings with high tensile strength are fully ribbed for better dampening of vibrations
Manual movement of the table is controlled by a hand wheel installed at the front of the table for easy operation
Table and saddle backlash is controlled by a double-nut design that keeps the feed screw in contact with a pair of bronze nut at all times. A unique SHARP feature
"Bridgeport-style" vertical knee mill
The saddle is built with extra width to fully support the entire travel of the table
Knee elevation is powered by a single 1-1/2 HP motor for rapid positioning of heavy work piece
Table and saddle movement is powered by individual control with rapid traverse function
STANDARD EQUIPMENT
Hardened and ground box ways
Power feed table and saddle
Knee elevation system
Coolant system
Draw bar
Front and rear rubber way cover
One-shot lube system
Tool Kit
Wired 220V or 440V (440V requires additional Transformer)
Options/Accessories
Digital Readout systems
Power drawbar
Riser block (6”)
Halogen work light
Drill chuck with arbor R-40
Milling vise