Top Seller
VICTOR 24000T SERIES 24" x
Location:
Port Orange, FL
Manufacturer:
Victor lathes
Model:
24000T SERIES
Spindle Bore:
108 x 1 : 20
Distance between Centers:
53"

Specifications

Condition:
new
Stock number:
2460T
Power:
Main motor: 20 HP, 3 Phase
Capacity:
Swing over bed: 23-5/8"
Carriage:
Cross slide travel: 13”
Warranty:
1 YEAR
Bed width:
16-1/2"
Headstock:
Spindle bore diameter: 4.13"
Tailstock:
Tailstock taper center: M.T. #5
Coolant pump:
1/8 HP
Inch threads:
2 ~ 56 TPI x 45 kinds
Spindle nose:
D1-11
Metric threads:
0.5 ~ 14 mm x 31 kinds
Swing over gap:
32-1/4"
Threads & feeds:
Range of longitudinal feeds: 0.0012” ~ 0.0287”/rev.
Speed selections:
25, 38, 53, 75, 108, 149, 214, 308, 424, 603, 860, 1200
Gross weight: lbs:
8,250
Spindle bore taper:
108 x 1 : 20
Weight & dimensions:
Shipping dimensions (LxWxH): 120” x 54” x 75”
Range of cross feeds:
0.0004” ~ 0.0118”/rev.
Rapid traverse motor:
1/2 HP, 3 Phase
Compound slide travel:
9”
Swing over cross slide:
15"
Tailstock quill travel:
7”
Distance between centers:
53"
Number of spindle speeds:
12 Steps
Taper of center in sleeve:
M.T. #5
Range of spindle speeds (rpm):
25 ~ 1,200 rpm
Subcategory:
Engine / toolroom

Description

ITEM: 24" x 60" Precision Heavy Duty Lathe
MAKE: VICTOR®
MODEL: 24000T SERIES
PART# 2460T
Product Features
Tough built to last with large 4-1/8" spindle bore, 4-way rapid traverse, and 20 HP main motor. The best in its class to handle utmost demanding work
High precision hardened and ground spindle
Hardened and precision ground induction bedways with high tension mechanize casting iron
Spindle is supported by 3 bearings (2 taper roller bearings and one ball bearing)
4-1/8" large spindle bore with D1-11 camlock spindle nose
Rapid and positive magnetic disc brake system is operated by emergency switch control or foot brake
All running parts are lubricated by a pressure pump in gearbox
Sliding, surfacing, and screw-cutting motions are fully interlocked in apron
A cone-clutch device in the apron to prevent overload
Dual speed tailstock quill (ratio 1:1 and 1:4) provides easy drilling operation
4-way power rapid traverse
Ampere meter for power consumption monitoring
Jog button for easy spindle speed changes
20 HP main motor
STANDARD ACCESSORIES
4-way power rapid traverse
Removable gap
Tailstock with duo speed quill
Coolant system
Chuck cover with limit switch
D.P. / module thread change gears
Threading dial indicator
Dead center M.T. #5
Leveling screws and pads
Manual and parts list
MACHINE INCLUDES
20" 4-jaw chuck
Steady rest with rollers
Follow rest
4-way tool post
Face plate
Micro bed stop
Halogen work light
Chuck cover with limit switch