Top Seller
GMC in Port Orange, FL
Location:
Port Orange, FL
Price:
$61,950 USD
Manufacturer:
GMC lathes
Model:
GML-4060H / GML-4080H / GML-40120H / GML-40180H / GML-40240H
Spindle Bore:
6-1/4”, D1-11

Specifications

Condition:
new
Stock number:
GML-4080HLB6
Voltage:
220V/208V, 3 PH; 440V/460V, 3 PH
Warranty:
1 YEAR
Main motor:
20 HP, 220V or 440V, 3 phase, prewired on 220V
Cross feeds:
0.00157-0.378 IPR, 64 kinds
Inch threads:
32-1TPI, 32 kinds
Spindle bore:
6-1/4”, D1-11
Width of bed:
24” very wide bed
Metric threads:
1-240 mm , 53 kinds
Module threads:
0.25-60 mm, 47 kinds
Spindle speeds:
9 – 691 rpm / 18 steps
Max. swing in gap:
47-1/4"
Coolant pump motor:
1/8 HP, 220V or 440V, 3 phase, prewired on 220V
Longitudinal feeds:
0.0027-0.66 IPR, 64 kinds
Max. swing over bed:
40-9/16"
Rapid traverse motor:
2 HP, 220 or 440V, 3 phase, prewired on 220V
Max. workpiece weight:
6,000 lbs.
Diametral pitch threads:
60 – 1/2 DP , 47 kinds
Taper of spindle center:
M.T.# 5
Max. length of workpiece:
60 80 120 180 240
Max. travel of top slide:
8-7/8"
Max. travel of cross slide:
24-3/16"
Diameter of tailstock quill:
4-3/4"
Max. swing over cross slide:
27-9/16"
Machine weight, approx., lbs:
14,100 15,100 16.100 18,100 21,500
Cross slide rapid travel speed:
75” / min.
Max. travel of tailstock quill:
10-5/8"
Overall dimensions lxwxh (in.):
152x68x80 171x68x80 204x68x80 263x68x80 327x68x80
Longitudinal rapid travel speed:
126” / min.
Taper of tailsotck quill center:
M.T. # 6
Effective length in gap to chuck:
9"
Effective length in gap to spindle:
15"
Subcategory:
Engine / toolroom

Description

ITEM: 40" x 80" - 240" Heavy Duty Gap Bed Lathes with 6-1/4" Spindle Bore
MAKE: GMC®
MODEL: GML-4060HLB6 / GML-4080HLB6 / GML-40120HLB6 / GML-40180HLB6 / GML-40240HLB6
Product Features
ISO 9001 certified
Large spindle bore 6 -1/4”
Heavy Duty spindle D1-11
Heavy Duty guideway width 24”
Heavy Duty main motor 20 HP
18 spindle speeds from 9 to 691 rpm
32 kinds of inch threads, and 53 kinds of metric threads
Threading and feeding rate change without changing gears
4-way rapid traverse to carriage and cross slide
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Adjustable hydraulic clutch for spindle turning and brake
Power 220V /208V, 3 phase, 60 HZ ( 440V /460V is optional )
H means HD, LB means large spindle
STANDARD EQUIPMENT
20” 3-jaw chuck with top reversible jaws
25” 4-jaw chuck
31-1/2” Face plate
12” drive plate
20” large steady rest
Follow rest
Removeable gap
4-way toolpost
Foot brake
Work light and coolant system
Section splash guard on rear of carriage
(2) dead centers and (1) reducing sleeve
Thread chasing dial
4-way rapid traverse on carriage
Tool box
Options/Accessories
PART# ITEM
TA-40H Taper attachment, 30” travel
— 6pc set quick change tool post set
— 18” - 28” large steady rest with roller jaws
SINO-2080 DRO for GML-4080HLB6, SINO, 2 axis, free install
NW2080 DRO for GML-4080HLB6, NEWALL, 2 axis, free install
NW20120 DRO for GML-40120HLB6, NEWALL, 2 axis,free install
NW20160 DRO for GM-40180HLB6, NEWALL, 2 axis, free install
NW20240 DRO for GML-40240HLB6, NEWALL, 2 axis, free install