Top Seller
U.S. INDUSTRIAL USL 47240 CZ
Location:
Port Orange, FL
Manufacturer:
U S INDUSTRIAL
Model:
USL 47240 CZ
Spindle Bore:
4.134" (105mm)

Specifications

Condition:
new
Stock number:
USL 47240 CZ
Warranty:
1 YEAR
Spindle bore:
4.134" (105mm)
Spindle type:
D1-11 Camlock
Main motor hp:
15 HP (11 kw) 220V or 440V, 3-phase
72 cross feeds:
1/3 of Longitudinal values
Swing over bed:
47" (1200mm)
Swing over gap:
55.11" (1400mm)
56 inch threads:
1 to 56 TPI
Skid dimensions:
331” long, 48” wide, 80” tall
Tailstock taper:
No. 6 Morse Taper
Rapid feed motor:
0.25 HP
18 spindle speeds:
14 to 750 RPM
43 module threads:
0.5 to 56mm
52 metric threads:
1 to 240mm
Length of bedways:
236" (6000mm)
Coolant pump motor:
90 watts, 6.6 gallons per minute
Cross-slide travel:
15.74" (400MM)
Lathe gross weight:
22,500 lbs. (Net Weight: 19,500 lbs.)
Compound rest travel:
9.05" (230mm)
72 longitudinal feeds:
.0035 to 1.52 IPR
Swing over cross slide:
24.8" (630mm)
Tailstock spindle travel:
8.07" (205mm)
27 diametral pitch threads:
1 to 28 DP
Maximum workpiece weight, between centers (with steady rest support):
6,613 lbs.(3000 Kg)
Maximum workpiece weight, between centers (without steady rest support):
2,645 lbs.(1200 Kg)
Maximum workpiece length with 3-jaw chuck (longer with 4-jaw of face plate and tailstock overhang):
228" (5790mm)
Subcategory:
Engine / toolroom

Description

ITEM: 47" x 228" Precision Geared Head Engine Lathe
MAKE: U.S. INDUSTRIAL®
MODEL: USL 47240 CZ
Product Features
This precision, medium duty geared head engine lathe incorporates hardened and precision ground bedways and wide, precision ground gears. It has a gap-bed design, large diameter leadscrew, separate feed rod and weight bearing tailstock. There are forward/reverse levers at both the apron and the head stock with rapid feed on lathe apron
As with all U.S. Industrial lathes, it comes with a compliment of standard accessories, 3 and 4-jaw chucks, follow and steady rests, rapid travel, work lamp, a coolant system and an operator/service manual
Unique cast-in slated bed troughs directs coolant and chips to full length
rear coolant pan
STANDARD EQUIPMENT
16" 3-Jaw Chuck. Universal, self-centering with an American standard tongue and groove top jaws
25" 4-jaw independent chuck
Steady rest - 12" capacity
4-way toolpost
Thread Dial
Work Lamp
Flood coolant system and rear tank
Inch reading dials on apron, cross-slide and compound
Manual with test certificate
40" Face plate & Dog plate
Follow rest - 7" capacity
Rapid Travel
Safety chuck shield (not shown)
Taper Attachment (included and installed on this machine)
Large spindle bore to pass 4"
Cable track wiring protection behind bed
Qty of TWO, 3 shaft supports for long lathe
(slides along bed and supports lead screw, feed rod and chuck control rod.)
Options/Accessories
ITEM
Newall 2-axis Digital Readout installed
Optional 17.5” Steady Rest (8 weeks delivery)
Quickchange toolpost kit with holders
Iscar cutting tool package