1999 BLACK BROTHERS H-APP1-00520 FEED

1999 BLACK BROTHERS H-APP1-00520 FEED THROUGH PRESS SYSTEM [PF-010388] in United States

Location:
United States
Price:
$79,500 USD
Manufacturer:
BLACK BROTHERS
Model:
H-APP1-00520

Specifications

Condition:
used
Year:
1999
Recnum:
PF-010388
Comments:
Complete BLACK BROTHERS System consisting of (2) Presses - Hot and Chilled!
Machtype:
FEED THROUGH PRESS SYSTEM
Condition info:
(3-6) Good Condition [5]
Current status:
Active
Elect./voltage:
460 V, 60 Cy, 3 Ph.
Appr. repl. cost:
500000

Description

Complete System consisting of (2) Presses - Hot and Chilled!BLACK BROTHERS Air Pod Press High Temperature Hot Press, Model H-APP1-00520.

-- Side Load Air Pod Press with 126" x 62" Platens.

-- Adjustable daylight opening of 2" - 10"

-- 5" Usable air pod stroke.

-- Total of (30) Air Pods provide 20 PSI over entire platen area.

-- Gun Drilled platens are 2.25" thick and can be heated up to 400° F.

-- Pass Line Height of 44" to top of lower platen.

-- Platen stroke controlled by adjustable stops, connected to worm gear screw adjustment boxes on upper frame. Boxes are connected together with couplings and shafts to allow a single handwheel to adjust the stops on both sides of the platen to control the platen stroke to maintain lamination thickness +/- 0.001". Stops to be adjusted before platen pressure is applied. Digital read-out to indicate platen stop position in 0.001" increments.

-- 80 PSI Compressed Air Source required (not included in purchase price).

-- 120 Gallon (16 cubic foot) Air Supply Tank supplied with check valve on 1-1/2" air inlet line for fast platen close cycle. Oversize air control system valves, hose and piping, and larger input openings on each Air Pod to allow both faster close under pressure, and faster exhaust when platens open.BLACK BROTHERS Air Pod Chilled Press, Model C-APP1-00520.

-- Chilled platen to maintain a temperature of approximately 60° F.

-- Side Load Air Pod Press with 126" x 62" Platens.

-- Adjustable daylight opening of 2" - 10".

-- 5" Usable air pod stroke.

-- Total of (30) Air Pods provide 20 PSI over entire platen area.

-- Gun Drilled platens are 2.25" thick and are chilled by (2) STERICO "Compak 2" series Water Chillers with 118,800 BTU/Hr.

-- Pass Line Height of 44" to top of lower platen.

-- 80 PSI Compressed Air Source required (not included in purchase price).

-- 120 Gallon (16 cubic foot) Air Supply Tank supplied with check valve on 1-1/2" air inlet line for fast platen close cycle. Oversized air control system valves, hose and piping, and larger input openings on each Air Pod to allow both faster close under pressure, and faster exhaust when platens open.Includes Conveyor through both Air Pod Presses and extending on the infeed for lay-up space to allow lamination to be assembled on conveyor belt.

-- Conveyor belt made of teflon/fiberglass fabric mounted to oversized roller chain carrier to maintain positive belt location in both directions, and afford accurate positioning prior to pressure being applied.

-- Conveyor is driven by a 3 HP inverter controlled motor connected through a wormgear speed reducer to drive conveyor at 25 to 75 fpm.

-- Soft Start/Stop drive on belt and is mounted on outfeed Chilled Press.Electrical Control system for conveyor drive includes Push Buttons at Operator Position on Lay-Up Area to start the conveyor when the lay-up is complete, to feed the the lamination into the Hot Press. This drive is interlocked and timer controlled. These include timer