Top Seller
TRAK MILLS in Dodge Center,
Location:
Dodge Center, MN
Price:
$19,495 USD
Manufacturer:
TRAK
Model:
TRL 1440EX
Spindle Taper:
MT#5

Specifications

Condition:
new
Stock number:
061645
Width of bed:
8.1"
Height of bed:
10.6"
Spindle motor:
5 HP
Spindle taper:
MT#5
Quill diameter:
1.575"
Swing over bed:
14"
Quill taper hole:
MT#3
Tool section max:
3/4"
Height of centers:
7"
Coolant pump motor:
1/8 HP
Cross slide travel:
8.0"
Number of bearings:
2
Spindle motor brake:
MAGNETIC
Spindle speed range:
60 - 2400 RPM
Maximum rapid feed x:
100
Maximum rapid feed z:
100
Spindle through hole:
1.56"
Way surface hardness:
400-450 HB
Coolant tank capacity:
3 GAL
Amps full load current:
15
Head stock lubrication:
SPLASH LUBE
Spindle nose (camlock):
D1-4
Swing over cross slide:
7.O"
Tailstock/quill travel:
5"
Swing over saddle wings:
14"
Distance between centers:
40"
Taper in reduction sleeve:
3
Spindle dia. at front bearing:
2.36"
Subcategory:
Mills
Subcategory 2:
Cnc machining centers

Description

TRAK (NEW)MODEL 1440EX LATHE
HEIGHT OF CENTERS,,,,,,,,,,,,,,,,,, 7"
DISTANCE BETWEEN CENTERS,,,,,,,,,,, 40"
SWING OVER BED,,,,,,,,,,,,,,,,,,,,, 14"
SWING OVER SADDLE WINGS,,,,,,,,,,,, 14"
SWING OVER CROSS SLIDE,,,,,,,,,,,,, 7.O"
CROSS SLIDE TRAVEL,,,,,,,,,,,,,,,,, 8.0"
TOOL SECTION MAX,,,,,,,,,,,,,,,,,,, 3/4"
COOLANT TANK CAPACITY,,,,,,,,,,,,,, 3 GAL
WIDTH OF BED,,,,,,,,,,,,,,,,,,,,,,, 8.1"
HEIGHT OF BED,,,,,,,,,,,,,,,,,,,,,, 10.6"
SPINDLE NOSE (CAMLOCK),,,,,,,,,,,,, D1-4
SPINDLE THROUGH HOLE,,,,,,,,,,,,,,, 1.56"
SPINDLE TAPER,,,,,,,,,,,,,,,,,,,,,, MT#5
TAPER IN REDUCTION SLEEVE,,,,,,,,,, 3
SPINDLE DIA. AT FRONT BEARING,,,,,, 2.36"
NUMBER OF BEARINGS,,,,,,,,,,,,,,,,, 2
SPINDLE SPEED RANGE,,,,,,,,,,,, 60 - 2400 RPM
TAILSTOCK/QUILL TRAVEL,,,,,,,,,,,,, 5"
QUILL DIAMETER,,,,,,,,,,, 1.575"
QUILL TAPER HOLE,,,,,,,,, MT#3
SPINDLE MOTOR,,,,,,,,,,,,,,,,,,,,,, 5 HP
POWER REQUIREMENTS CONTROL,,,,,,,,,
110 VOLT SINGLE PHASE; 8A
POWER REQUIREMENTS MACHINE,,,,,,,,,
220 VOLT THREE PHASE; 60 HZ
AMPS FULL LOAD CURRENT,,,,,,,,,,,,, 15
MAXIMUM RAPID FEED X,,,,,,,,,,,,,,, 100
MAXIMUM RAPID FEED Z,,,,,,,,,,,,,,, 100
COOLANT PUMP MOTOR,,,,,,,,,,,,,,,,, 1/8 HP
SPINDLE MOTOR BRAKE,,,,,,,,,,,,,,,, MAGNETIC
WAY SURFACE HARDNESS,,,,,,,,,,,,,, 400-450 HB
HEAD STOCK LUBRICATION,,,,,,,,,,, SPLASH LUBE
SLIDING DOOR FOR EASY SET-UPS
BEDWAYS HARDENED AND GROUND
SLIDING SURFACES TURCITE COATED
DOVETAILS ON CROSS SLIDE, V-WAYS ON SADDLE
ADJUSTABLE SADDLE GIBS
MACHINE OPTIONS:
CHUCK,,,,,,,,,,,,,,,,,,,,,,,,,,,, POR
COLLET CLOSER,,,,,,,,,,,,,,,,,,,, POR
COOLANT PUMP,,,,,,,,,,,,,,,,,,,,, POR
FACE PLATE,,,,,,,,,,,,,,,,,,,,,,, POR
FOLLOW REST,,,,,,,,,,,,,,,,,,,,,, POR
REMOTE STOP/GO SWITCH,,,,,,,,,,,, POR
STEADY REST,,,,,,,,,,,,,,,,,,,,,, POR
TOOLING KIT,,,,,,,,,,,,,,,,,,,,,, POR
WORK LAMP,,,,,,,,,,,,,,,,,,,,,,,, POR