- Serial number:
- Stock number:
- Detector Head weight: 100mm unit is 20kg Detection Sensitivity at Phase Out: 150mm unit is 1.2mm mild steel & 1.7mm Stainless steel
- Detector head weight:
- 100mm unit is20kg
- Aluminium head construction:
- Coating is of Food Grade Epoxy White
- Detection sensitivity at phase out:
- 150mm unit is 1.2mm mild steel & 1.7mm Stainless steel
- Metal detectors
PROUDLY AUSTRALIAN MADE!
This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials.
Detector Head weight: 100mm unit is20kg
Detection Sensitivity at Phase Out: 150mm unit is 1.2mm mild steel & 1.7mm Stainless steel
Metal Free Zones: 150mm: 40mm each side for moving metal
Aluminium Head Construction: Coating is of Food Grade Epoxy White
Offering major benefits in performance, the VF range of drop through or gravity fed metal detectors are ideal wherever common packaging materials such as aluminium foil, metalized film are used or, simply where space is a major factor.
Vertical packaging lines present challenges to metal detector manufacturers or suppliers, in the form of limited installation space, proximity of metal support structures, moving weigh hoppers or discharge chutes etc, including a degree of engineering problems that commonly exist in the installation. This is where the VF units have the advantage of ignoring most of these problems.
Drop-through metal detectors are commonly used on Form Fill & Seal machines and mounted just above the forming tube, or other applications for gravity fed, free flowing powders, pipeline, liquid or granular materials.
For pipeline applications, these units can be mounted in any position with the ability to
operate with hot or cold products travelling at high speeds.
The VF metal detectors greatly benefit from its unique RF Electromagnetic field suppression system, that enables the units to perform highly in the most restricted of spaces, whilst operating in close proximity to fixed or moving metal structures.
The VF range of detectors have an extremely low metal free zone of approximately 40mm each side of the detector coils, and as a standard, they are fitted with remote mounted controls up to 10 meters away for ease of operation.
Get email updates for ABM VF-150