Top Seller
PHASE II MET-U1A / MET-U1A50
Location:
Port Orange, FL
Price:
$5,395 USD
Manufacturer:
PHASE II
Model:
MET-U1A / MET-U1A50

Specifications

Condition:
new
Stock number:
MET-U1A
Length:
160mm
Scales:
Material Measurement Range
Brinell:
Steel 75-650 HB
Vickers:
Steel 75-1000 HV
Diameter:
25mm
Warranty:
5 YEARS
Rockwell b:
Aluminum 59-99 HRB
Rockwell c:
Steel 20-67 HRC
Max archive:
100 Tests
Time of test:
1.5 seconds
Pressure force:
1.5 kgf 5 kgf
Weight: w/probe:
720 g (1.10 lbs)
Indentation depth:
30µm
Battery type: 4-aa:
NiMH Re-Chargeable
Min. radius for test:
5mm
Operating temperature:
5-104 degrees F
Min. thickness for test:
1mm
Max roughness of surface:
Ra 2.5µm Ra 4.5µm
Dimensions: ( h x w x d ):
180 x 80 x 43mm
Minimum thickness of sample:
.040” (1mm) —
Transducer test life (approx):
200,000
Subcategory:
Hardness testers

Description

ITEM: Ultrasonic Hardness Testers with Output
MAKE: PHASE II®
MODEL: MET-U1A / MET-U1A50
Product Features
The PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections
PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument
The MET-U1A/U1A50 meets ASTM A1038-10 specifications
UCI Portable Hardness Testing Method: Model No’s. MET-U1A and MET-U1A50
Ultrasonic Contact Impedance is a hardness testing method based on the measurement of the frequency shift of a resonating rod caused by the essentially elastic nature of the finite area of contact between the indenter and the test piece during the penetration. Described as a hardness testing practice using a calibrated instrument by pressing a resonating rod with a Vickers style Diamond indentor with a fixed force against the surface of the part to be tested
Tolerance +/- 3.0% deviation of average from the reference value of the test block with a minimum of 5 tests
Materials: steel & cast steel, alloy tool steel, stainless steel, aluminum, brass, bronze, wrought copper alloy
IP66 Waterproof and Dustproof!
Non-Destructive Hardness Testing!
Functions
Easy To Read Menu Operation
Large LCD Display w/ Back Light
USB Interface
Automatic Reading to All scales including Brinell, Rockwell, Superficial Rockwell
& Vickers
Automatic Mean Value
Data Archive Capacity
STANDARD ACCESSORIES
Base Instrument
15N (1.5kgf) Hand-Held Probe (MET-U1A)
50N (5kgf) Hand-Held Probe (MET-U1A50)
Calibrated Test Blocks (2pc)
Custom Carry Case
Battery Charger
Operation Manual