Top Seller
COLE-TUVE ARS-1.5 1 1/2" x
Location:
McClellan Park, CA
Manufacturer:
COLE-TUVE
Model:
ARS-1.5

Specifications

Condition:
new
Stock number:
1484
Motor:
1-1/4 HP
Electrics:
220Volt, 3 Phase, 60 HZ
Footprint:
28" X 24"
Round bar:
1-3/16" (SP)
Square bar:
1-3/16"
Brake-motor:
For Prompt Stopping of Rolls Rotation
Round tubing:
2-3/8" X 14 GAUGE (SP)
Square tubing:
1-1/2" X 1-1/2" X 11 GA.(0.118")
Working plane:
Horizontal/Vertical
Roll diameters:
5.82"(Upper) / 4.64"(Lower)
Shaft diameters:
1-3/16"
Weight (approx):
570 lbs
Flat bar on edge:
2" X 3/8"
Flat bar on flat:
3" X 5/8"
Pipe, schedule 40:
1-1/2" (SP)
(2) rolling speeds:
6 and 12 RPM
Angle iron, leg-in:
1-1/2" X 1-1/2" X 3/16"(SP)
Angle iron, leg-out:
1-1/2" X 1-1/2" X 3/16"
Rect. tubing, hard way:
2" X 1-3/16" X 11 Ga
Adjustment of upper roll:
Manual Adjustment
"t" iron, leg out or leg in:
2" X 2" X 5/16"
Channel iron, leg in or leg out:
2" X 1" X 3/16"
Subcategory:
Benders
Subcategory 2:
Angle rolls

Description

Model: ARS-1.5
VIDEO OF MACHINE UNDER POWER:

Capacities in Mild Steel:
Angle Iron, Leg-Out: 1-1/2" X 1-1/2" X 3/16"
Angle Iron, Leg-In: 1-1/2" X 1-1/2" X 3/16"(SP)
Flat Bar on Flat: 3" X 5/8"
Flat Bar on Edge: 2" X 3/8"
"T" Iron, Leg Out Or Leg In: 2" X 2" X 5/16"
Square Bar: 1-3/16"
Round Bar: 1-3/16" (SP)
Channel Iron, Leg in or Leg Out: 2" X 1" X 3/16"
Pipe, Schedule 40: 1-1/2" (SP)
Round Tubing: 2-3/8" X 14 GAUGE (SP)
Square Tubing: 1-1/2" X 1-1/2" X 11 GA.(0.118")
Rect. Tubing, Hard Way: 2" X 1-3/16" X 11 Ga.
(SP) The shapes marked (SP) required optional special rolls.
The other shapes can normally be rolled with the standard
rolls supplies with the machine. For production runs of some
of those shapes, optional special rolls may be desirable.
Rolling angle leg-in required optional leg-in guide rolls
and may require special rolls.
SPECIFICATIONS:
Shaft Diameters: 1-3/16"
Roll Diameters: 5.82"(Upper) / 4.64"(Lower)
(2) Rolling Speeds: 6 and 12 RPM
Adjustment of Upper Roll: Manual Adjustment
Brake-Motor: For Prompt Stopping of Rolls Rotation
Motor: 1-1/4 HP
Working Plane: Horizontal/Vertical
Footprint: 28" X 24"
Weight (Approx): 570 lbs.
Electrics: 220Volt, 3 Phase, 60 HZ
or Single Phase Available - However
Machine is Only Single-Speed
in Single Phase.
FEATURES:
* Suited well for small to medium bending & rolling
requirements
* Horizontal and vertical operation
* The two lower rolls are driven by brake-motor, the upper
roll is easily manually adjusted on hardened slides.
* Dual rolling speeds are standard
STANDARD EQUIPMENT:
* Standard rolls for some of the shapes listed above; others
require special rolls. (See Shape Chart on brochure)
* 2-Lateral Guide Rolls
* 2-Speed control
* Electrics motor with brake
* Emergency stop & overload controls
* Full cabinet base with door
* Scale for positions of upper roll
* Movable foot control