Top Seller
BAILEIGH R-H150 Double-Pinch 5-1/2" ANGLE
Location:
McClellan Park, CA
Model:
R-H150

Specifications

Condition:
new
Stock number:
6550
Pinch:
Double
Power:
220V / 3-phase
Lower roll dia:
15.354"
Shaft diameter:
4.724"
Digital readout:
Yes
Roll adjustment:
Hydraulic
Shipping weight:
10,400 lbs
Subcategory:
Benders
Subcategory 2:
Angle rolls

Description

Model: R-H150
Roll Adjustment: Hydraulic
Pipe Capacity: Size: 5.5" (sch. 40) / Min. Dia.:73"
Round Tube Capacity: Size: 6.250" (.125") / Min. Dia.: 118"
Square Tube Capacity: Size: 4" (.196") / Min. Dia.: 118"
Solid Round Capacity: Size: 3.375" / Min. Dia.: 36"
Flat Bar Easy Way: Size: 7.875" (2") / Min. Dia.: 40"
Flat Bar Hard Way: Size: 5.5" (1.125") / Min. Dia.: 118"
Angle Iron Capacity: Size: 4.75" (.5") / Min. Dia.: 60"
Shaft Diameter: 4.724"
Lower Roll Dia.: 15.354"
Pinch: Double
Digital Readout: Yes
Power: 220V / 3-phase
Shipping Weight: 10,400 lbs.
DESCRIPTION:
The R-H150 hydraulic roll bender is the largest roll bender
that Baileigh Industrial stocks. This massive machine has
the capacity to roll 6-1/4" round tubing and 4-3/4" x 4-3/4"
x 1/2" angle iron. But it is not just the capacity that is
important; the R-H150 has the ability to save time and money
in your shop. The R-H150 is a double pinch style machine
which means that the operator can pre-bend and post bend the
material which saves valuable production time, material, and
allows for tight rolling by eliminating the wasted length of
straight associated with most roll benders. Pre and post
bending is accomplished by two hydraulic cylinders connected
to the bottom two rolls. The positions of these rolls are
displayed on a digital readout that has the ability to set
stops for each shaft. This helps with repeatability when
doing production runs.
The R-H150 has a heavy duty steel plate frame that is bolted
and welded to ensure no flex when bending at full capacity.
This ring roller can be operated in the vertical and
horizontal position depending on what OD and size material
needs to be rolled. A movable operator control pendant
houses all control buttons including the digital readout for
the roll positions and foot pedals for direction of
operation.