Back Gauge Length 23.62"
Return Speed 2.36" / sec.
Nc Control Type Delem
Oil Capacity 45 gal
Throat Depth 7.87"
Bending Capacity Max Length Max Thickness 78.75" / .196"
Stroke Distance 5.9"
Table Size (Width) 6.29"
Approach Speed 3.14" / sec.
Bed Length 78"
Bending Speed .236" / sec
Maximum Capacity 90 tons
Distance Between Housings 61"
Distance From Table To Ram 11.81"
Power 220V / 3-phase
Shipping Weight 8,800 lbs.
Shipping Dimensions 94.50" x 63" x 94.50"
Baileigh's BP-9078 CNC hydraulic sheet metal press brake is
a very rigid 2 axis machine with a heavy frame that is made
up of electro welded plate steel. The top beam travels up
and down using several 3 axis bearings coupled to a hardened
rail system. Hydraulic cylinders are controlled by
mechanical stops inside the cylinders assuring accurate
angle of bend at all times. An encoder system indicates the
exact position of the top beam and adjustments are made on
the Delem controller to a servo motor. We use a unique
parallel mechanism that provides forced synchronized motions
so the top die is parallel to the bottom. The 90 tons of
hydraulic pressure can be measured and regulated depending
on the application. The back gauge on this hydraulic press
brake is controlled by the Delem controller to a servo motor
with an encoder for accurate positioning. The Delem
controller can be programmed with up to 100 programs, with
up to 25 commands per program. There manual finite
adjustments to lower or higher the back gauges. There is
hydraulic auto crowning compensation so any flexing in the
middle of the machine while at full capacity can be adjusted
to create crisp bends using the maximum width of the
machine. The BP-9078 CNC hydraulic sheet metal press brake
is fully decked out making all options standard. This
quality sheet metal bender comes standard with inside
lighting, a set of multi-vee tooling, Delem controls, auto
crowning compensation, a six sensor safety curtain and front
Get email updates for Baileigh BP-9078CNC