Top Seller
BAILEIGH SW-132 132 TON IRONWORKER,
Location:
McClellan Park, CA
Manufacturer:
Baileigh
Model:
SW-132
Capacity:
1.125" x 1.062"
Weight:
9,460 lbs

Specifications

Condition:
new
Stock number:
6634
Power:
220V 3-Phase
Blade length:
18.3"
Cycles / min:
30 @ 15 mm
Throat depth:
16"
Angle bending:
4" x .5"*
Pipe notching:
4.4"*
Punch capacity:
1.125" x 1.062"
Working height:
30.3"
Round bar shear:
1.75"
Shipping weight:
9,460 lbs
Square bar shear:
1.75" x 1.75"
Angle flange trim:
4"
Flat bar shearing:
18.1" x .75"
Punching pressure:
132 Tons
Max. stroke length:
3"
Shipping dimensions:
85.5" x 44" x 80.7"
Angle shearing at 90:
6" x 6" x .6"
Diameter x thickness:
2" x .625"
Multi vee press brake l x t:
27.5" x .187"*
Rectangle notcher w x d x t:
2" x 3.5" x .5"
Vee notcher side x side x t:
4.1" x 4.1" x .6"*
Single vee press brake l x t:
9.875" x .75"*
Large v notcher side x side x t:
5.75" x 5.75" x .5"*
Subcategory:
Ironworkers

Description

Model: SW-132
Round Bar Shear: 1.75"
Rectangle Notcher W x D x T: 2" x 3.5" x .5"
Single Vee Press Brake L x T: 9.875" x .75"*
Punch Capacity: 1.125" x 1.062"
Punching Pressure: 132 Tons
Pipe Notching: 4.4"*
Multi Vee Press Brake L x T: 27.5" x .187"*
Throat Depth: 16"
Vee Notcher Side x Side x T: 4.1" x 4.1" x .6"*
Working Height: 30.3"
Square Bar Shear: 1.75" x 1.75"
Angle Shearing at 90: 6" x 6" x .6"
Angle Bending: 4" x .5"*
Angle Flange Trim: 4"
Blade Length: 18.3"
Large V Notcher Side x Side x T: 5.75" x 5.75" x .5"*
Max. Stroke Length: 3"
Diameter x Thickness: 2" x .625"
Cycles / Min.: 30 @ 15 mm
Flat Bar Shearing: 18.1" x .75"
Power: 220V 3-Phase
Shipping Weight: 9,460 lbs.
Shipping Dimensions: 85.5" x 44" x 80.7"
DESCRIPTION:
Baileigh Industrial's biggest all vertical ironworker is the
SW-132. This behemoth has 132 tons of punching and 179 tons
of shearing and notching power. It is also a dual operator
machine, meaning two workers can work on opposite sides of
the machine without a loss in power. To achieve such power
the SW-132 boasts a 220 Volt three phase 15 hp motor to
power the industrial grade hydraulic system. The SW-132 is
truly a workhorse and will be at home in any size shop.
The SW-132 is a five station ironworker with stations for
punching, notching, flat bar shearing, angle shearing, and
bar shearing. Like most Baileigh Industrial hydraulic
ironworkers the SW-132 uses the best design in the industry
and uses vertical motion at each station. This type of
machine eliminates the harsh snap in the punching station
common on other brands. By eliminating the harsh snap the
machine has less fatigue on it and the tooling lasts much
longer. The punching station on the SW-132 ironworker comes
standard with seven sets of punches and dies as well as an
oversized work table that has material stops and is scaled
for easy setup.
The Baileigh Industrial SW-132 hydraulic ironworker was been
designed and built to the highest quality standards in the
industry. No corners were cut; the frame is fully welded
for rigidity and hydraulic clamps were added to the shearing
station to hold everything in alignment. This eliminates any
lifting of the material when shearing, extending blade life
and providing a square sheared part. Other great features of
the SW-132 are an electric back gauge, swing away stripper,
oversized work tables, foot pedal operation, and waste
buckets.
The SW-132 also has optional tooling such as press brakes,
pipe notchers, channel and I-beam shears, and others are
available.