Top Seller
KENT KLS-1440 14" x 40"
Location:
McClellan Park, CA
Manufacturer:
Kent lathes
Model:
KLS-1440
Spindle Bore:
MT #5
Distance between Centers:
40" (1000 mm)

Specifications

Condition:
new
Stock number:
4565
Main motor:
3 HP (2-speed, 3-phase)
Net weight:
1650 lbs
Cross feeds:
0.0004"-0.0108" IN/REV
Please note:
Installed options may require a deposit
Gross weight:
1950 lbs
Metric pitch:
22 (0.45-7.5) MM
Quill travel:
4-3/4" (120 mm)
Spindle nose:
D1-4 camlock
Thread pitch:
8 TPI
Width of bed:
8 1/8" (206 mm)
Quill diameter:
1-25/32" (45 mm)
Spindle speeds:
16 speeds (2 ranges)
Swing over bed:
14" (356 mm)
Swing over gap:
20" (506 mm)
Quill bore taper:
MT #3
Top slide travel:
4" (100 mm)
Overall dimension:
76" x 29" x 47" (LxWxH)
Packing dimension:
80" x 35" x 61" (LxWxH)
Coolant pump motor:
1/8 HP (3-phase)
Cross slide travel:
7" (180 mm)
Leadscrew diameter:
7/8" (22 mm)
Longitudinal feeds:
0.0012"-0.0294" IN/REV
Power requirements:
220 Volts, 60 Hz, 3-Phase, 10 Amp
Spindle bore taper:
MT #5
Spindle speed range:
45-1800 RPM
Standard (whit-worth):
40 (4-112) TPI
Through hole diameter:
1-1/2" (38 mm)
Swing over cross slide:
8-5/8" (220 mm)
Distance between centers:
40" (1000 mm)
Subcategory:
Engine

Description

Model: KLS-1440
Swing over bed: 14" (356 mm)
Swing over cross slide: 8-5/8" (220 mm)
Swing over gap: 20" (506 mm)
Width of bed: 8 1/8" (206 mm)
Distance between centers: 40" (1000 mm)
Cross slide travel: 7" (180 mm)
Top slide travel: 4" (100 mm)
Spindle speeds: 16 speeds (2 ranges)
Spindle speed range: 45-1800 RPM
Through hole diameter: 1-1/2" (38 mm)
Spindle nose: D1-4 camlock
Spindle bore taper: MT #5
Standard (Whit-worth): 40 (4-112) TPI
Metric pitch: 22 (0.45-7.5) MM
Longitudinal feeds: 0.0012"-0.0294" IN/REV
Cross feeds: 0.0004"-0.0108" IN/REV
Leadscrew diameter: 7/8" (22 mm)
Thread pitch: 8 TPI
Quill travel: 4-3/4" (120 mm)
Quill diameter: 1-25/32" (45 mm)
Quill bore taper: MT #3
Main motor: 3 HP (2-speed, 3-phase)
Coolant pump motor: 1/8 HP (3-phase)
Overall dimension: 76" x 29" x 47" (LxWxH)
Packing dimension: 80" x 35" x 61" (LxWxH)
Net weight: 1650 lbs
Gross weight: 1950 lbs
Power Requirements: 220 Volts, 60 Hz, 3-Phase, 10 Amp.
SPECIAL ACCESSORIES PACKAGE -- INCLUDED WITH LATHE -- NO
EXTRA CHARGE!
3-jaw chuck (6"), 4-jaw chuck (8"), Face plate (12")
Steady rest, Follow rest, 4-position tool post
Coolant system, Full-length splash guard, Worklight
Micro carriage stop, Thread chasing dial
Toolbox with standard tools
FEATURES:
* 3 HP main spindle motor
* 16 speeds, all geared headstock
* Jog button for easy gear changes
* Hardened and ground gears and bedways
* Cast iron machine bedways and base
* Removable chip pan for easy clean up
* Foot brake and T-Slot compound Inch/metric reading on
dials
* Inch/metric ruler on tailstock quill
* ISO 9001 certified manufacturer
OPTIONS AND ACCESSORIES:
Acu-Rite 200S DRO (2-axis, x=0.0001"/z=0.0002" res)
Mitutoyo DRO (2-axis, x=0.0002"/z=0.0005" res)
DRO installation charge
Aloris BXA #2-BS set (tool post plus 4 bars)
5C lever style collet closer
Royal spindle type live center
Live center set with interchangeable tips
BTC 3-jaw chuck w/back plate (Zero-set, 6" D1-4)
BTC 3-jaw chuck w/back plate (Zero-set, 8" D1-4)
Transformer for 440v power (3 KVA)
3HP Phase converter for single phase power (rotary-type)
Prolong Ultra-Cut coolant (2.5 gallon, mixes 1:30)
Prolong Anti-Friction lubricant (1 quart, mixes 1:10)
*Please note: Installed options may require a deposit,
which is non-cancelable and non-refundable.