Top Seller
JET GH-1640ZK 16" x 40"
Location:
McClellan Park, CA
Manufacturer:
JET Tools lathes
Model:
GH-1640ZK
Distance between Centers:
40

Specifications

Condition:
new
Stock number:
7887
Motor:
2 Speed, 230/460V, 3PH
Prewired:
230V
Low speed:
5HP
High speed:
7-1/2HP
Stock number:
321850
Spindle mount:
D1-6
Net weight (lbs.):
3,877
Width of bed (in.):
12-1/4
Coolant pump system:
1/8HP ,3PH
Length of gap (in.):
10-5/8
Max. tool size (in.):
1 x 1
Swing over bed (in.):
16
Carriage travel (in.):
36-3/8
Number of inch threads:
61
Range of metric threads:
0.5-20
Swing through gap (in.):
23-5/8
Cross slide travel (in.):
10-13/16
Number of metric threads:
24
Number of spindle speeds:
12
Spindle taper (w/ sleeve):
MT-6(MT-4)
Follow rest capacity (in.):
1/2 -3-1/8
Hole through spindle (in.):
2
Range of cross feeds (ipr):
0006-.0365
Steady rest capacity (in.):
7/16 - 3-15/16
Taper in tailstock spindle:
MT-4
Compound slide travel (in.):
5-1/8
Range of inch threads (tpi):
1-5/8-72 TPI
Swing over cross slide (in.):
10
Range of spindle speeds (rpm):
42-1,800
Distance between centers (in.):
40
Tailstock spindle travel (in.):
6
Range of longitudinal feeds (ipr):
0015-.0913
Overall dimensions (in./l x w x h):
91x42-1/8x49
Subcategory:
Engine

Description

Model: GH-1640ZK
Stock Number: 321850
Swing over Bed (in.): 16
Swing over Cross Slide (in.): 10
Swing Through Gap (in.): 23-5/8
Length of Gap (in.): 10-5/8
Distance between Centers (in.): 40
Hole Through Spindle (in.): 2
Spindle Mount: D1-6
Spindle Taper (w/ Sleeve): MT-6(MT-4)
Number of Spindle Speeds: 12
Range of Spindle Speeds (RPM): 42-1,800
Number of Longitudinal and Cross Feed Rates: 122
Range of Longitudinal Feeds (IPR): .0015-.0913
Range of Cross Feeds (IPR): .0006-.0365
Number of Inch Threads: 61
Range of Inch Threads (TPI): 1-5/8-72 TPI
Number of Metric Threads: 24
Range of Metric Threads: 0.5-20
Max. Tool Size (in.): 1 x 1
Compound Slide Travel (in.): 5-1/8
Cross Slide Travel (in.): 10-13/16
Carriage Travel (in.): 36-3/8
Tailstock Spindle Travel (in.): 6
Taper in Tailstock Spindle: MT-4
Steady Rest Capacity (in.): 7/16 - 3-15/16
Follow Rest Capacity (in.): 1/2 -3-1/8
Width of Bed (in.): 12-1/4
Overall Dimensions (in./L x W x H): 91x42-1/8x49
Coolant Pump System: 1/8HP ,3PH
Motor: 2 Speed, 230/460V, 3PH
High Speed: 7-1/2HP
Low Speed: 5HP
Prewired: 230V
Net Weight (lbs.): 3,877
FEATURES:
* Chrome Molybdenum headstock gears are hardened and ground
* Universal Gearbox allows inch, metric, diametral and
module pitch threads without changing gears
* High quality ANSI Class 50 wear-resistant bed ways are
hardened and ground
* Removable Gap allows up to 23-5/8" diameter workpiece
* Attractive chrome-plated control levers, dials and knobs
complete this impressive package
* D1-6 spindle is precisely ground for accuracy and
supported by high quality spindle bearings
* Large easy to use foot brake
STANDARD EQUIPMENT:
* 8" 3-Jaw Chuck with top reversing jaws
* 10" 4-Jaw Chuck
* 12" Face Plate
* Follow Rest & Steady Rest
* Fully integrated coolant system
* Full length splash guard
* Micro-carriage stops
* Carriage-mounted spindle control
* Removable Chip Tray in the front of stand
* 4-Way Tool Post
* Articulating halogen work lamp
* Mounting pads and levers
2-YEAR FACTORY WARRANTY INCLUDED!!