Top Seller
KENT PRECISION TOOLROOM LATHE 11"
Location:
McClellan Park, CA
Manufacturer:
Kent lathes
Model:
PRECISION TOOLROOM LATHE
Distance between Centers:
18" (457 mm)
Spindle Nose:
5C (10degree)

Specifications

Condition:
new
Stock number:
3699
Standard:
36 (11-108) tpi
Face plate:
$500.00
Main motor:
3 HP (3-phase)
Net weight:
2300 lbs
Cross feeds:
5/16"-4" per minute
Follow rest:
$500.00
Steady rest:
$750.00
Gross weight:
2450 lbs
Metric pitch:
36 (0.275-2.7) mm
Quill travel:
3.75" (95 mm)
Thread pitch:
8 tpi
Width of bed:
6-3/4" (172 mm)
Quill diameter:
1.358" (34.5 mm)
Spindle speeds:
Inf. Variable
Swing over bed:
11" (280 mm)
Dro installation:
$300.00
Quill bore taper:
MT #2
Top slide travel:
3" (76 mm)
Overall dimension:
65" x 28" x 58" (LxWxH)
Packing dimension:
85" x 36" x 68" (LxWxH)
Tool setting gage:
$100.00
Coolant pump motor:
1/4 HP (3-phase)
Cross slide travel:
6"
Leadscrew diameter:
1"
Longitudinal feeds:
5/16"-7" per minute
Power requirements:
220Volt, 3 Phase, 60Hz, 20 Amp
Spindle speed range:
0-4000 rpm
Swing over carriage:
9" (229 mm)
Spindle nose taper (i):
5C (10degree)
Spindle nose taper (o):
4degree
Swing over cross slide:
6" (152 mm)
Vertical cut-off slide:
$950.00
Distance between centers:
18" (457 mm)
Taper turning attachment:
*$1,595.00
4-station turret t-ait-06:
$980.00
6" 4-jaw chuck with 4 back plate:
$600.00
Radius turning attachment t-rt-108:
$1750.00

Description

Model: CTL-618EVS
Swing over bed: 11" (280 mm)
Swing over cross slide: 6" (152 mm)
Swing over carriage: 9" (229 mm)
Width of bed: 6-3/4" (172 mm)
Distance between centers: 18" (457 mm)
Cross slide travel: 6"
Top slide travel: 3" (76 mm)
Spindle speeds: Inf. Variable
Spindle speed range: 0-4000 rpm
Spindle nose taper (I): 5C (10degree)
Spindle nose taper (O): 4degree
Standard: 36 (11-108) tpi
Metric pitch: 36 (0.275-2.7) mm
Longitudinal feeds: 5/16"-7" per minute
Cross feeds: 5/16"-4" per minute
Leadscrew diameter: 1"
Thread pitch: 8 tpi
Quill travel: 3.75" (95 mm)
Quill diameter: 1.358" (34.5 mm)
Quill bore taper: MT #2
Main motor: 3 HP (3-phase)
Coolant pump motor: 1/4 HP (3-phase)
Power Requirements: 220Volt, 3 Phase, 60Hz, 20 Amp
or Single Phase, 10 Amp
Overall dimension: 65" x 28" x 58" (LxWxH)
Packing dimension: 85" x 36" x 68" (LxWxH)
Net weight: 2300 lbs
Gross weight: 2450 lbs
FEATURES:
* 0-4000 infinitely variable spindle speeds using
Electronic Vector Drive
* 1-1/16" 5C thru-collet capacity
* Induction hardened and ground alloy steel bedways for
extra longevity
* Full-bearing carriage
* T-Slot compound
* Inch/metric reading on dials
****CURRENT SPECIAL ACCESSORIES PACKAGE PROMOTION - FREE****
* 3-jaw chuck (6"),
* 5-C collet closer,
* Coolant system,
* Chip and coolant shield,
* Back Plate,
* Halogen work light,
* Toolbox with standard tools
OPTIONS AND ACCESSORIES:
Tool setting gage: $100.00
5C collet fixture plate (3-3/8" Dia): $175.00
5C collet fixture plate (4-3/8" Dia): $200.00
Vertical cut-off slide: $950.00
Steady rest: $750.00
Follow rest: $500.00
Face plate: $500.00
Taper turning attachment: *$1,595.00
6" zero-set universal 3-jaw chuck with 4 back plate
$970.00
6" 4-jaw chuck with 4 back plate: $600.00
Acu-Rite 200S DRO (2-axis, x=0.0001"/z=0.0001" res)
*$2,400.00
DRO installation: $300.00
Indicator Carriage Stop T-CSD-618 (without indicator)$220.
4-Station Turret T-AIT-06: $980.00
Radius Turning Attachment T-RT-108: $1750.00
*Installed options are non-cancelable and non-refundable.