Top Seller
DAKE JOHNSON V24 23" x
Location:
McClellan Park, CA
Manufacturer:
Dake saws
Model:
V24
Weight:
2,025 pounds

Specifications

Condition:
new
Stock number:
5035
Depth:
60 inches
Weight:
2,025 pounds
Lubricant:
Mist-type unit OPTIONAL
Base width:
60 inches
Horsepower:
2.2 H.P. maximum
Blade width:
5/16 - 1 inch x 187 inches length
Mist system:
$852.28
Throat size:
23 inches
Compressed air:
80-120 (clean, dry shop air for chip
Overall height:
90 inches
Worktable tilt:
10 left / 30 right
Welder capacity:
1/8 - 1 inch
Maximum work height:
13 inches
Worktable dimensions:
26-3/8 inches x 26-3/8 inches
Blade speed - low range:
50 - 425 FPM
Blade speed - high range:
425 - 4,250 FPM
Circular cutting attachment:
$352.18
Worktable height from floor:
42 inches
25 mm/32 mm guide insert (1"):
$205.36/pair
6 mm/8 mm guide insert (3/8"):
$146.98/pair
10 mm/12 mm guide insert (1/2"):
$154.24/pair
16 mm/20 mm guide insert (3/4"):
$191.18/pair
Arm) 3 mm/4 mm guide insert (1/4"):
$129.50/pair
Subcategory:
Vertical bandsaws

Description

Model: V24 VERTICAL BANDSAW
Throat Size: 23 inches
Maximum Work Height: 13 inches
Blade Width: 5/16 - 1 inch x 187 inches length
Blade Speed - Low Range: 50 - 425 FPM
Blade Speed - High Range: 425 - 4,250 FPM
Worktable Dimensions: 26-3/8 inches x 26-3/8 inches
Worktable Tilt: 10 left / 30 right
Worktable Height from Floor: 42 inches
Welder Capacity: 1/8 - 1 inch
Horsepower: 2.2 H.P. maximum
Weight: 2,025 pounds
Overall Height: 90 inches
Base Width: 60 inches
Depth: 60 inches
Lubricant: Mist-type unit OPTIONAL
Voltage:
Available 230-volt three phase
Available 460-volt three phase (external transformer)
Machine should be wired to main service by a qualified
Electrician.
AMP:
20-amp service for 230-volt machine
16-amp service for 460-volt machine
Compressed Air: 80-120 (clean, dry shop air for chip
blower)
FEATURES:
* Rip fence, work lamp, tachometer and one standard blade
furnished with the machine.
* Protractor, and high-speed roller guides are all standard
on this machine.
* The heavy machined table has 4 T-slots for more versatile
work, and an auxiliary worktable gives a larger work area.
* Blade welder built into the machine, capable of welding
blade stock from 1/8 to 3/4 in.
* Built in annealer and grinder for professional results.
* Heavy-duty 2-speed gearbox with 50 to 500 feet per minute
speed in low range and from 500 TO 4500 feet per minute in
high range.
* Conveniently placed controls. Blade tension indicator,
easy to read and takes the guess work out of blade
tensioning.
* Blade changes are made quickly with easy access to the
band wheels.
* A blade speed selection compass mounted at eye level for
quick reference.
* Steel base that out weighs comparable competitive models.
This in turn helps reduce any wobble and vibration.
* Low voltage controls, with door interlocks on all doors
and electrical enclosure.
* (2) wheels may be used for shorter blade length, when full
capacity is not needed.
OPTIONS:
Mist System: $852.28
Circular Cutting Attachment: $352.18
GUIDE INSERTS:
2 pair total on machine (one pair upper arm/one pair lower
arm) 3 mm/4 mm Guide Insert (1/4"): $129.50/pair
6 mm/8 mm Guide Insert (3/8"): $146.98/pair
10 mm/12 mm Guide Insert (1/2"): $154.24/pair
16 mm/20 mm Guide Insert (3/4"): $191.18/pair
25 mm/32 mm Guide Insert (1"): $205.36/pair
$340 for transformer (480 Volt)