Top Seller
DAKE VH-40 40" VERTICAL BANDSAW
Location:
McClellan Park, CA
Manufacturer:
Dake saws
Model:
Dake VH-40
Weight:
2,360 pounds

Specifications

Condition:
new
Stock number:
4246
Depth:
60 inches
Weight:
2,360 pounds
Lubricant:
Mist-type unit OPTIONAL
Base width:
72 inches
Horsepower:
2.2 H.P. maximum
Band wheels:
3 wheels (16-1/2" diameter)
Throat size:
41 inches
Compressed air:
80-120 (clean, dry shop air for chip
Overall height:
78 inches
Worktable tilt:
10 left / 30 right
Welder capacity:
1/8 - 1 inch
Maximum work height:
13 inches
Worktable dimensions:
26-3/8 inches x 26-3/8 inches
Blade width - 2 wheels:
5/16 - 1 inch x 138 inches length
Blade width - 3 wheels:
5/16 - 1 inch x 189 inches length
Blade speed - low range:
50 - 425 FPM
Blade speed - high range:
425 - 4,250 FPM
Worktable height from floor:
40-7/8 inches
Subcategory:
Vertical bandsaws

Description

Model: VH-40 VERTICAL BANDSAW
Throat Size: 41 inches
Maximum Work Height: 13 inches
Blade Width - 3 Wheels: 5/16 - 1 inch x 189 inches length
Blade Width - 2 Wheels: 5/16 - 1 inch x 138 inches length
Blade Speed - Low Range: 50 - 425 FPM
Blade Speed - High Range: 425 - 4,250 FPM
Worktable Dimensions: 26-3/8 inches x 26-3/8 inches
Worktable Tilt: 10 left / 30 right
Worktable Height from Floor: 40-7/8 inches
Welder Capacity: 1/8 - 1 inch
Band Wheels: 3 wheels (16-1/2" diameter)
Horsepower: 2.2 H.P. maximum
Weight: 2,360 pounds
Overall Height: 78 inches
Base Width: 72 inches
Depth: 60 inches
Lubricant: Mist-type unit OPTIONAL
Voltage:
Available 230-volt three phase
Available 460-volt three phase (external transformer)
Machine should be wired to main service by a qualified
Electrician.
AMP:
20-amp service for 230-volt machine
16-amp service for 460-volt machine
Compressed Air: 80-120 (clean, dry shop air for chip
blower)
FEATURES:
* Adjustable blade feed pressure supplies up to 60 lbs. of
cutting pressure. This simple but effective system requires
no additional motors or hydraulics, leaving it maitenance
free.
* Variable speed range. 50-500 fpm continuous range. Speed
indicator is clearly visable.
* For larger work requirements. Throat size of more than
40". Auxiliary worktable measuring 15-1/2 x 21-1/2". Blade
tension indicator. Protractor. Adjustable worktable
(hydraulic).
*Power feed and tilt table combination makes compound angle
cutting easy and practical.
OPTIONS:
Mist System
Circular Cutting Attachment
GUIDE INSERTS:
*2 pair total on machine (one pair upper arm/one pair lower
arm)
*3 mm/4 mm Guide Insert (1/4")
*6 mm/8 mm Guide Insert (3/8")
*10 mm/ 12 mm Guide Insert (1/2")
*16 mm/ 20 mm Guide Insert (3/4")
*25 mm/ 32 mm Guide Insert (1")