Top Seller
Anritsu MT8801B Radio Communications Analyzer
Location:
Elgin, IL
Model:
MT8801B

Specifications

Condition:
used
Interface:
GPIB IEEE-488, RS-232, and Printer Port
Modulation:
FM, PM
Power meter:
0 to 40 dBm
Af generator:
20 Hz to 20 kHz
Freq counter:
10 MHz to 3 GHz
Siggen level:
- 143 to - 28 dBm
Audio analyzer:
AF level, AF freq counter, Distortion
Condition info:
Refurbished
Rf power meter:
0 to 40 dBm
Frequency range:
300 kHz to 3 GHz
Max input level:
+ 40 dBm
Signal generator:
300 kHz to 3 GHz
Internal modulation:
20 Hz to 20 kHz

Description

Every major radio communication system in the world, including GSM/DCS1 800/PCS1900, IS-136A, PDC and PHS, can be evaluated using just one Anritsu MT8801B Radio Communication Analyzer, cover- ing the 300 kHz to 3GHz frequency band in one hardware platform, and the dedicated measurement software options. The call processing test and sensitivity test using loopback method are possible for GSM/DCS1800/PCS1900 and IS-136A. In addition, connection testing, as well as send testing while communicating, are also possible for PDC and PHS measurement by using the call processing function. And the PDC uplink RCH can be monitored (RSSI, estimated error rate) too. FM radio transmission /reception tests are simplified by using the optional analog measurement function. And the optional spectrum analyzer function covering 10 MHz to 3 GHz is very useful for maintenance as well as for measuring spurious near carrier on production lines. GPIB and RS-232C interfaces are standard, so this model can be incorporated easily in- to automated production lines or on-site automated testing systems. The time required for testing equipment on production lines is greatly reduced using the high-speed adjacent channel power and occupied bandwidth measurement functions based on Anritsu's proprietary measurement algorithm and DSP (Digital Signal Processing). Furthermore, major transmission test items such as transmission frequency, modulation accuracy (phase error), transmission power, rise/fall characteristics of burst wave, adjacent channel power, etc., can be measured and judged pass/fail for limit value of the each item.
Anritsu MT8801B Features:
Frequency Range: 300 kHz to 3 GHz
Max Input Level: + 40 dBm
Power Meter: 0 to 40 dBm
Signal Generator: 300 kHz to 3 GHz
SigGen Level: - 143 to - 28 dBm
Interface: GPIB IEEE-488, RS-232, and Printer Port
SigGen Level: -143 to -28 dBm
Internal Modulation: 20 Hz to 20 kHz
AF Generator: 20 Hz to 20 kHz
RF Power Meter: 0 to 40 dBm
Freq Counter: 10 MHz to 3 GHz
Modulation: FM, PM
Audio Analyzer: AF level, AF freq counter, Distortion
Single unit for GSM, IS-136A, PDC, and PHS
Batch measurements of transmission test items
Only about 1 second is required to measure all major transmission test items, including frequency, modulation accuracy, origin offset, transmission rate, transmission power, leakage power during carrier off, rise/fall edge characteristics, occupied bandwidth, and adjacent channel power. Pass/fail decisions for limit value of each test item can also be displayed
Analog measurement function (Option 01)
The MT8801B has general analog measurement functions too. Efficient FM TX/RX testing is made easy by built-in signal generator, AF oscillator, RF analyzer (power meter, frequency counter, FM measurement) and audio analyzer functions. This function is especially useful for the IS-136A analog test.
Transmission measurement characteristics such as frequency, power, and frequency deviation can be measured easily.
Reception measureme