Top Seller
Valhalla Scientific 2500EP AC/DC Current
Elgin, IL
Valhalla Scientific


3 VDC/pk AC, 30 VDC/pk AC for 2500EN
Condition info:


The ranges of the Valhalla Scientific 2500EP, AC/DC Current Calibrator, are compatible with virtually all analog meters and most of the digital multimeters with AC-DC current capability. For benchtop DMMs and the handheld meters, virtually all with 10 amp measurement, the 10 amp range of the 2500EP is ideal.
Ammeters, current transformers, shunts, current sensors, coils, wattmeters and a variety of parametric tests requiring constant, yet variable, AC or DC current are but a few of calibration and lab test uses of the 2500EP.
The units fast response characteristics allow it to precisely track the input reference voltage in terms of amplitude, phase, frequency, and waveshape. Each range also features zero to 200% dynamic response capability (up to maximum output).
Dynamic Range:
0 to 200% of range
DC or RMS AC up to maximum rated output (12 Amps maximum)
DC Accuracy:
(180 days, 25°C ±5°C) ±0.01% of output ±0.02% of Full Scale
AC Accuracy:
(180 days, 25°C ±5°C) ±0.05% of output ±0.1% of Full Scale
Input Impedance:
100 Kilohms, except the 2500EN is 10 Megohms
Compliance Voltage:
10 Volts DC or pk AC
Input/Output Ratio:
2.00000 volt input provides full- scale output
20 volts for 2500EN (200% of range)
±0.0005%/15 min. - 0.005% for 24 Hours
Output Protection:
Fuse protected at 15 amps Max.
Input: 3 VDC/pk AC, 30 VDC/pk AC for 2500EN
Response Time:
1 millisecond to ±0.01% of final value following input amplitude or frequency change
Maximum Isolation Voltage:
±200 VDC or peak AC
Input Common Mode Rejection:
60db @ DC linearly decreasing to 40 db @ maximum frequency
Temperature Coefficient:
±0.001% of output ±0.002% of range/°C below 20°C or above 30°C
double the above for AC
115/230 VAC ±10% 50-60Hz
381mm/15" L x 432mm/17" W x 133mm/5.23" H
14 Kg/30 lbs. Net 18 Kg/40 lbs. shipping weight