Anritsu MS8608A in Germany

Anritsu MS8608A in Germany

Location:
Germany
Price:
$5,298 USD
Manufacturer:
Anritsu
Model:
MS8608A

Specifications

Condition:
used
Division:
Test and Measurement
Amplitude range:
Amplitude reference level setting range: –80 to +50 dBm (high-power input), –100 to +30 dBm (low-power input)
Low end frequency limit:
9.00 kHz
High end frequency limit:
7.90 GHz
Resolution bandwidth max:
20.00 MHz
Resolution bandwidth min:
300 Hz
Category:
Tester
Subcategory:
Transmitters

Description

Anritsu Digital Mobile Radio Transmitter Tester,
frequency range 9 kHz - 7,8 GHz, GPIB.
The
MS8608A
and MS8609A are transmitter testers equipped with an internal spectrum analyzer, a modulation analyzer and a power meter. Just one tester can cover the development and manufacturing of base stations and mobile stations, as well as the construction and maintenance of base stations.
The MS8608A supports 9 kHz-7.8 GHz and high power inputs up to +40 dBm. The MS8609A supports 9 kHz-13.2 GHz and input power up to +20 dBm.
The spectrum analyzer has resolution bandwidths up to 20 MHz, meaning that it can readily support measurements of wide-band signals. It is ideal for evaluating devices such as base station power amplifiers, due to its wide dynamic ranges of 68 dB (typical for 5 MHz offset) and 75 dB (typical for 10 MHz offset) for adjacent channel power (ACP) measurement (sweep method). The modulation analyzer realizes all Vector Signal Analysis (VSA) functions through high-speed DSP. The power sensor can perform highly accurate power measurements of ±0.4 dB by using an amorphous power sensor.
Up to three measurement software options (such as W-CDMA, GSM/EDGE, HSDPA, WLAN/802.11, CDMA, 1xEVDO) can be installed simultaneously. Input signals can be selected from RF or I/Q inputs. For I/Q signals, balanced or unbalanced input can also be selected.
Each tester can be equipped with optional GPIB, RS-232C, and 10BASE-T Ethernet interfaces for remote measurement. High-speed GPIB data transmission of 120 kbyte/sec enables high-speed measurement on the manufacturing line. The monitor uses an easy-to-see TFT color LCD.