2007 SELCO EBTR 120 TWIN

2007 SELCO EBTR 120 TWIN PUSHER REAR LOAD, AUTOMATIC PANEL SAW W/ROTATING STATION [PH-012230] in Italy

Location:
Italy
Manufacturer:
Selco
Model:
EBTR 120 TWIN PUSHER

Specifications

Condition:
used
Year:
2007
Recnum:
PH-012230
Comments:
An exceptionally well-maintained SELCO with practically everything one needs!
Machtype:
REAR LOAD, AUTOMATIC PANEL SAW W/ROTATING STATION
Condition info:
(7-9) Excellent condition [7]
Current status:
Active
Elect./voltage:
400 V, 50/60 Cy, 3 Ph.
Appr. repl. cost:
230000

Description

SELCO EBTR 120 REAR LOAD, AUTOMATIC PANEL SAW W/ROTATING STATION

-- Specifications:220" (5,600 mm) Overall cutting length, 169" (4,300 mm) pusher stroke; 4.8" (122 mm) main saw blade projection; 20 HP (15 kW) \main saw motor, 3.6 HP (2.7kW) "PFS" electronic post form scoring motor for profiled edges; "DIGISET" electronic scoring blade adjustment from the PC.

-- Saw Carriage:Variable saw carriage forward travel speed from 1 - 150 MPM (3 - 492 FPM), saw carriage driven by AC brushless Servo motors.

-- Pusher System:(12) Material clamps (open up to 103 mm), of which (4) are closely spaced in crosscut area, (4) in rip cut area, (4) in auxiliary area.Rack & pinion driven, variable max. forward speed for main pusher is 120 MPM (393 FPM), max. forward auxiliary pusher speed is 120 MPM (393 FPM); pusher fences driven by AC brushless Servo motors.

-- TWIN-PUSHER System:Equipped with a split-system pusher fence that supplies the concept for independent rip cutting & crosscutting of different sized panels at the same time & in the same workspace.One system works at the front while the other system collects the next stack of panels from the lift table.

-- Rear of Machine:Rotating station with: (3) Lateral aligners for the width of the panel, (2) lateral aligners for the length of the panels after rotation to accurately position book of panels on rear saw table prior to cutting.Modular roller rear machine table with: (14) Total roller track modules, (9) roller track modules 80 mm dia., (5) roller track modules 50 mm dia.; built-in rotating device for head cuts.Side aligning device cross-aligners to accurately position book of panels against the right angle fence prior to crosscutting.

-- Rear Loading System:220" x 87" (4,300 x 2,200 mm) Automatic 4-column electro-hydraulic Lift Table.Material can be staged or offloaded possibly from the LH, RH side or rear of the machine; 4.2" dia. powered rollers with fork cutouts currently setup for loading from the back RH side facing.22 FPM (6.7 MPM) infeed/outfeed speed; 18-1/2" (470 mm) max. bunk height; 15,000 Lbs (6,800 kG) lift cap; rear of machine enclosed for safety.

-- Operator & Machine Control:PC Based controller with SELCO OSI (Open SELCO Interface) + Windows XP Operating System; 15" flat screen monitor; standard keyboard & mouse; CD ROM; on-board optimization (displays cutting dimensions & patterns), possible tele-service diagnostic, data input by keyboard or possible direct downloading from office PC.

-- Complete with:(2) Side/crosscut aligners; (1) front mounted air flotation table in crosscut section, 26" x 81" (660 x 2,057 mm); (3) front mounted air flotation table in rip cut section, 26" x 98" (660 x 2,490 mm) with rounded front.

-- Actual Model is SELCO EBTR 120 TWIN PUSHER 5600/2200.Note: EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistics� from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door