• A & D SCALE, MODEL EP-60KA

    No price - Cleveland, OH Recently Added
    • Manufacturer: EP

    one (1) unused a & d scale, model ep-60ka, approximately 12" x 14" top with digital readout, approximately 61kg capacity, serial# 4001345. new in the box.

  • A & D SCALE, MODEL EP-60KA

    No price - Cleveland, OH Recently Added
    • Manufacturer: EP

    one (1) unused a & d scale, model ep-60ka, approximately 12" x 14" top with digital readout, approximately 61kg capacity, serial# 4001344. new in the box.

  • Square D Company - TM515 (N\A) - Hydraulic Lift Table w/ Square D Pendant

    No price - Worcester, MA Recently Added
    • Manufacturer: Square D

    dims: 48" x 42" | includes: square d bw72y pendant

  • Square D Company - TM515 (N\A) - Hydraulic Lift Table w/ Square D Pendant

    No price - Worcester, MA Recently Added
    • Manufacturer: Square D

    dims: 48" x 42" | includes: square d bw72y pendant

  • Graham 3024-A

    No price - Cleveland, OH Recently Added
    • Manufacturer: Graham

    one (1) used 3" graham single screw extruder, model 3024-a, 24:1 l/d, eletrically heated, air cooled barrel, jacketed feed section, lufkin gearbox with 13.93:1 ratio, lowboy design with 20" centerl...

  • 2006 Century RE-3-44 L/D

    $30,000 - Morrisville, PA
    • Manufacturer: Century

    century 3+ ring extrusion system, ring extruder the re series of extruders are twelve screw, co-rotating, intermeshing extruders which are designed with a self wiping screw profile. this extruder t...

  • N/A - (N/A) - Stainless Material Bin on Portable Stand

    No price - Worcester, MA

      includes: sight glass, portable stand | dimensions: 24''w x 24''l x 17''d

    • Sterlco - M2B2010-D (N\A) - 1 HP Sterlco 12 kW Water Temperature Control Unit

      No price - Worcester, MA Recently Added
      • Manufacturer: Sterlco

      hp: 1 | kw: 12 | fla: 16.2 | type: water | voltage: 480/3/60 | max operating temp: 250°f

    • 2.5" FARREL DUMP EXTRUDER, 16:1 ;/D

      No price - Cleveland, OH Recently Added
      • Manufacturer: Farrel

      one (1) used 2.5" farrel single screw extruder, approximate 16:1 l/d ratio, electrically heated, air cooled non-vented 3 zone barrel, no blowers, water cooled feed throat with ram feed, approximate...

    • 4.5″ CRAMMER FEEDER, NO S/N

      No price - Elk Grove Village, IL

        4.5″ crammer feeder, no s/n, direct coupled to a gearbox, powered by a 15 hp 1750 rpm d/c motor, no drive or controls