• 385 Square Feet Agc Proflow Plate And Frame Heat Exchanger #201602

    • Manufacturer: AGC Proflow
    • Capacity: 385 SQUARE FEET / 36 SQUARE METER

    385 square foot 316 stainless steel plate heat exchanger. manufactured by agc proflow, model 250-1, serial number 59212, built 1999. rated 150 psi @ 225 degrees f on process side, 150 psi @ 225 degrees f on servi...

    No price
    West Windsor Township, NJ, USA
  • 385 Square Feet Agc Proflow Plate And Frame Heat Exchanger #201603

    • Manufacturer: AGC Proflow
    • Capacity: 385 SQUARE FEET / 36 SQUARE METER

    385 square foot 316 stainless steel plate heat exchanger. manufactured by agc proflow, model 250-1, serial number 59211, built 1999. rated 150 psi @ 225 degrees f on process side, 150 psi @ 225 degrees f on servi...

    No price
    West Windsor Township, NJ, USA
  • SZ 2 Innocenti ZR 22S 32 Sendzimir Mill

    • Manufacturer: Sendzimir
    • Weight: 12ton

    year of commissioning: 1971 width: 300-822mm input gauge range: max 5mm output gauge range: min 0.25mm maximum speed: 450m/min maximum tension: 275kn maximum load: 400ton coolant type: mineral oil, 5000 l/...

    No price
    Newark, NJ, USA
  • SZ 1 INNOCENTI ZR 22 32 SENDZIMIR MILL

    • Manufacturer: Sendzimir
    • Weight: 12ton Coil

    year of commissioning: 1960 width: 300-822mm input gauge range: max 3.2mm output gauge range: min 0.1mm maximum speed: 600m/min maximum tension: 192kn maximum load: 400ton coolant type: mineral oil, 3500 ...

    No price
    Newark, NJ, USA
  • 1270mm Sendzimir 20-Hi Rolling Mill

    • Manufacturer: Sendzimir
    • Capacity: 3900 kg at 193mpm

    coil size: id - 508mm / 20" od - 1400mm max / 55" wt - 10mtons max / 22,040 lbs | line speeds: 120 & 240mpm / 393 - 787 fpm | manufacture: hitachi / 1957 under sendzimir license | strip width: 600-1270mm / 23.6-...

    No price
    Roxboro, NC, USA
  • 1400mm Finishing Foil Rolling Mill

        coil size: od - 1354mm max entry / 53.3" wt - 5000kg max / 11,020 lbs | line speed: 1500 mpm max / 4920 fpm | manufacture: achenbach / 1975 2013 complete refurbish: - new achenbach electrics - new "optiroll" agc...

        No price
        Roxboro, NC, USA
      • 60" Steel 4-Stand Tandem Cold Rolling Mill

        • Manufacturer: ABB

          material: carbon steel | coil size: id - 24" / 610mm od - 72" / 1828mm wt - 60,000lbs max / 27.2mtons | line speed: 3100 fpm max / 945 mpm | manufacture: bliss / new 1954 many upgrades thru the years last operat...

          No price
          Roxboro, NC, USA
        • Heat Exchanger, Plate, AGC, 350 SF, S/st, (138) Plates

              plate type heat exchanger, manufactured by agc, proflow, model 300s, all stainless steel contacts, approximately 350 sq. ft. surface area. includes (138) plates measuring 16" x34", with rail length of 36", plate ...

              No price
              San Dimas, CA, USA
            • 58" Blaw Knox Aluminum Foil Mill

              • Manufacturer: Blaw-Knox

                coil size: id - 315 mm od - 925mm / 36.4" drum length - 1350mm weight - 2000 kg max / 4408lbs | line speed: 685 mpm / 2247 fpm | manufacture: blaw knox / 1968 | strip width: max - 58" / 1473mm min - 35" / 880mm ...

                No price
                Roxboro, NC, USA
              • One (1) Used 36" 2-Hi Aluminum Hot Mill Stand

                • Manufacturer: Bliss

                  coil size: id - 24" od - 72" max. weight - 10,000 lbs. max | line speed: 104 and 251 fpm max based on original design and the gearbox that was in use but is no longer available. | manufacture: bliss modified by ...

                  No price
                  Roxboro, NC, USA