• 1996 AIDLIN AUTOMATION Airtrans #7230

    • Manufacturer: AIDLIN AUTOMATION

      dual plenum air conveyor system with 28mm and 38mm neck finishes. includes shuttle mechanism at single filer discharge (single filer not included). includes approximately 80' of each lane plus (4) left hand 90 de...

      No price
      Ball Ground, GA, USA
    • AIDLIN AUTOMATION CF20-24 #9412

      • Manufacturer: AIDLIN AUTOMATION

        overall dims l5'10" x w 4'6 x''h 8'-5". this unit is currently set up for 38 mm flat cap. ss electrical cabinet on right hand side of machine and includes allen-bradley 160 vfd. 24" wide belt.

        No price
        Ball Ground, GA, USA
      • AIDLIN AUTOMATION Air Trans #7789

        • Manufacturer: AIDLIN AUTOMATION

          approx 28 feet of air cap conveyor with no blower. can handle caps up to 1 1/2" diam x 1/2" tall. consist of 2-10' sections, 1- 8' section.

          No price
          Ball Ground, GA, USA
        • 1998 AIDLIN AUTOMATION CF 20-24 #14939

          • Manufacturer: AIDLIN AUTOMATION

            stainless steel construction with right hand discharge at approximately 12' elevation.  unit appears to be set for 28mm sport caps.

            No price
            Ball Ground, GA, USA
          • Aidlin Micro Bench Type Spot Welder TWA-3

            • Manufacturer: AIDLIN

              voltage: 440/460/480 volts, single phase | tap switch: 11-step | transformer: 5 kva | throat depth: 8 in | arm dia lower: .5 in | arm dia upper: .5 in | secondary amps: 12 | holder diameter: 0.25 in

              No price
              Chattanooga, TN, USA
            • Aidlin Micro Bench Type Spot Welder TWA-3

              • Manufacturer: AIDLIN

                model twa-3 voltage: single phase | tap switch: 10-step | transformer: 5 kva | throat depth: 8 in | arm dia lower: 42132 in | arm dia upper: 42132 in

                No price
                Chattanooga, TN, USA
              • AIDLIN CF-20-24 13036

                • Manufacturer: AIDLIN

                  waterfall cap elevator - hopper / elevator cap feed system - 20 cu ft cap hopper - electrical - 460 volt - 3 phase - 60 hz - 30 fla - cap chute height is 96" - chute exits on right side of elevator - footprint 4'...

                  No price
                  Shoemakersville, PA, USA
                • SIDEL Cap Elevator & Air Conveyor System #12919

                  • Manufacturer: SIDEL

                    sidel/aidlin waterfall cap sorter with air conveyor set on 28mm 1881 closure.

                    No price
                    Ball Ground, GA, USA
                  • Vial Packaging and Cartoning Line 2965

                    • Manufacturer: Unknown

                      used complete vial packaging and cartoning line. designed to process 5 ml or 11ml lyophilized vials with diluent companion vial. major components include garvey biflow accumulator, aidlin pick'n'place trayloader,...

                      No price
                      Red Bank, NJ, USA