• 1999 60 Ton 96" Bed Accurpress 7608 PRESS BRAKE, Automec 2 Axis CNC 99 Control

    $34,500 - Harrison, NJ, USA
    • Manufacturer: Accurpress
    • Model: 7608

    8' x 60 ton accurpress cnc hydraulic press brake model 7608 s/n 5520 new 1999 capacity 60 tons overall length of bed and ram 96 distance between housings 76 stroke 8 open height 14 throat depth 8 r...

  • 1993 110 Ton 120" Bed Guifil PE30-100 PRESS BRAKE, Automec CNC 1000 3-Axis Back Gauge

    $32,500 - Harrison, NJ, USA
    • Manufacturer: Guifil
    • Stroke: 3.94"
    • Capacity: 110 TONS

    guifil 110 ton x 10' upacting hyd. press brake model pe30-100 s/n 013250 new 1993 capacity .......................................... 110 tons working length..................................... 12...

  • Automec CNC150B

    $10,800 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    operator can display backgauge, ram position and r-axis dimension along with bend numbers gauge offset - all ram dimensions can be offset ± .393° with one data entry backgauge can be programmed to ...

  • Automec CNC9X9

    $8,500 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    additional information: control specifications 9 bends per job 9 cycles per bend 1/2" lcd display bend allowance ± .999” gauge offset - all backgauge dimensions can be offset ± .999” with one data ...

  • Automec CNC150/A

    $8,295 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    operator can display backgauge, ram position and r-axis dimension along with bend numbers backgauge can be programmed to retract on pinch point with 2 or 3 axis system 2 - ram depth modes additiona...

  • Automec CNC150/MB

    $8,700 - South El Monte, CA, USA Recently Added
    • Manufacturer: MB

    operator can display backgauge, ram position and r-axis dimension along with bend numbers backgauge can be programmed to retract on pinch point with 2 or 3 axis system 2 - ram depth modes additiona...

  • Automec CNC150/TD

    $20,420 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    operator can display backgauge, ram position and r-axis dimension along with bend numbers gauge offset - all ram dimensions can be offset ± .393° with one data entry backgauge can be programmed to ...

  • Automec CNC150/G48/TD

    $32,170 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    operator can display backgauge, ram position and r-axis dimension along with bend numbers backgauge can be programmed to retract on pinch point with 2 or 3 axis system 2 - ram depth modes

  • Automec CNC150/G48/HD

    $24,175 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    operator can display backgauge, ram position and r-axis dimension along with bend numbers gauge offset - all ram dimensions can be offset ± .393° with one data entry backgauge can be programmed to ...

  • Automec CNC150/HD

    $12,780 - South El Monte, CA, USA Recently Added
    • Manufacturer: Automec

    operator can display backgauge, ram position and r-axis dimension along with bend numbers gauge offset - all ram dimensions can be offset ± .393° with one data entry backgauge can be programmed to ...