• 1995 AXA VSC 1 Machining Center - Vertical

    No price - Nersingen, Germany Recently Added
    • Manufacturer: AXA

    x-travel 1820 mm y-travel 420 mm z-travel 480 mm control heidenhain tnc 407 table surface area 2000 x 500 mm table load capacity 2000 kg table height over floor 900 mm distance from table to spind...

  • 1991 AXA VSC 0 1600 (11.601M1 )

    No price - Nijkerk, Netherlands
    • Manufacturer: AXA VSC
    • Control: NUM 750 F

    kw: 20 | ano: 1991 | volts: 400v | cycles: 50 | control: num 750 f | número: 85046 | voltaje: 400v | r.p.m. spindle: 30 - 3000 | cross travel (mm): 300 | vertical travel (mm): 480 | longitudinal t...

  • 2004 AXA VSC-1-500-M/C

    No price - Krefeld, Germany
    • Manufacturer: AXA

    used axa vsc-1-500-m/c cnc milling machine control unit grundig cnc pilot table 1000x500 mm x,y,z travel 500x420x600 mm spindle taper sk40 spindle speed 8000 rpm magazine 40 tools can be seen under...

  • 1990 AXA VSC 0 - X3000

    No price - Staufenberg, Germany
    • Manufacturer: AXA

    vertical machining center make axa type vsc 0 -. 3000 m : 84983, built in 1990 technical specifications: x-axis stroke: 2 x 1200 mm / 3000 mm y-axis stroke: 300 mm z-axis stroke: 300 mm tool: isa ...

  • 1985 AXA DBZ 700 (VSC 1820/750)

    No price - Krefeld, Germany
    • Manufacturer: AXA
    • Weight: 3.900 kg

    axa dbz 700 (vsc 1820/750) vertical machining centers siemens controller 3 m / 4 x-travel 1400 mm (2x700mm) y-travel 350 mm z-travel 400 mm tool exchange device 32 speed ​​range 10 - 3800 u / min 8...

  • 2000 AXA VSC - 2 CNC - machining centre

    No price - Mertert, Luxembourg
    • Manufacturer: AXA

    hello here i have about 20 pieces of tool places to expand the chain magazine. you on the axa machining centre most places have free, d, h. gaps in the chain magazine you can extend this then. i a...

  • 1997 AXA VSC 2-M VMC, cheap

    No price - Chemnitz, Germany
    • Manufacturer: AXA

    power on 26700 hours prepared for fuer 4. und 5. axis table 2600 x 500 mm tool taper sk 40 spindle speed 40-4.700 rpm travel x/y/z 2.360 (2x800) / 500 / 480mm total connected load 24 kw size appr. ...

  • 1992 AXA VSC - 1 M CNC - machining centre

    No price - Mertert, Luxembourg
    • Manufacturer: AXA

    axa - baz type: vsc - 1 m or even vsc - 2m, then y - way 420 mm year of construction: 1992 siemens control: 810 m x - trail: 1800 mm reciprocating motion y - 350 mm or 420 mm z - 480 mm tool change...

  • AXA Germany VSC-2-M CNC Milling Centers

    $15,000 - Germany Recently Added
    • Manufacturer: AXA Germany

    cnc milling centers axa germany vsc-2-m used machine cnc vertical machining center / vmc table size 2600 x 500 mm travel x / y / z 2360 / 500 / 480 mm spindle sk 40, speed max 4700 rpm tool changer...

  • 1998 AXA VSC-1-M/C Machining center

    No price - Baden-Württemberg, Germany Recently Added
    • Manufacturer: AXA

    1 piece: bj 98, engine no. 85706, power 35kva, chip conveyor, tool changer 30fach, cnc has 2 editing pages, internal engine no. 5, presumably control defective control heidenhain, machining center....