• 2000 MAZAK MULTIPLEX 6200Y 8-AXIS CNC LATHE JV-20576TK

    $59,500 - Bethlehem, PA, USA
    • Manufacturer: Mazak

    size: 8" chucks

  • 2013 BRIDGEPORT PROTOTRAK 2-AXIS CNC MILL HB-20560

    $10,500 - Bethlehem, PA, USA
    • Manufacturer: Bridgeport
    • Weight: 750 LBS

    size: 9″ x 48″ t-slot, no. & size: 3 on 2.5″ centers maximum height above floor: 47.25″ spindle taper: r8 spindle drive speed, inf. variable: 60 – 500 rpm (low), 500 – 4200 rpm (high) mild steel (m...

  • BRIDGEPORT EZ TRACK 3 AXIS CNC MILL 1998

    $7,450 - Watertown, CT, USA
    • Manufacturer: Bridgeport

    bridgeport ez track 3 axis cnc mill good cond 1998 sem servo axis motors x & y axis cmc z axis servo dc 48" table newer flat screen monitor lube usa electric oiler us motors 2 hp 200v - 480v motor ...

  • PNEUFORM PB600 2 AXIS WIRE FORMING AND FLAT STOCK BENDER

    $16,995 - Watertown, CT, USA

      pneuform pb600 2-axis wireforming and flat stock bender, this machine can bend tube, wire and flat stock maximum wire capacity is 1/4" diameter this is the only machine pneuform built that can bend...

    • Mori Seiki MV40M 5 Axis Vertical Machining Center

      $39,500 - Watertown, CT, USA
      • Manufacturer: Mori seiki

      mori seiki model mv40m 5 axis vertical machining center     table size:                             35.4" x 17.7"   x-axis table travel:                    22.0"   y-axis saddle travel:            ...

    • 1995 MORI SEIKI ZL-15SMC 5-AXIS CNC LATHE JV-20593TK

      $29,900 - Bethlehem, PA, USA
      • Manufacturer: Mori seiki

      x-axis travel (upper / lower): 8.7″ / 7.7″ z-axis travel (upper / lower): 17.7″ / 15.4″ spindle speed: 50 – 5,000 rpm spindle nose: a2-5 hole trough spindle (main): 2.0” hole trough spindle (sub): ...

    • 1997 NAKAMURA TOME TW-30MMY 7-AXIS CNC LATHE JV-20555TK

      $69,500 - Bethlehem, PA, USA
      • Manufacturer: Nakamura
      • Spindle Bore: 3.5”

      maximum spindle speed: 3,600 rpm spindle drive motor: 30 hp c-axis rotation: 0.001 degree number of stations: 12 number of driven tool stations: 12 y-axis travel (left turret only): +/- 2.75” drive...

    • 2000 SWI TRAK K-3 2-AXIS CNC MILL HB-20559

      $12,000 - Bethlehem, PA, USA
        • Capacity: 750 LBS

        spindle taper:  r8 spindle speed range:  60-4200 rpm spindle motor:  3 hp dimensions:   70” lr x 65” fb x 86” h weight:  2,800 lbs electrics:  220 volts, 3 ph, 60 cyc prototrak age 2 2-axis cnc con...

      • 2008 HAAS SL-40 2-AXIS CNC LATHE TK-20468

        $69,500 - Bethlehem, PA, USA
        • Manufacturer: Haas

        chuck size: 15″ standard bar capacity: 4″ between centers: 51″ maximum cutting diameter: 25.5″ maximum cutting length: 44″ maximum cutting length w/standard workholding: 42.5″ maximum speed (gearbo...

      • 2000 LOGANSPORT MDAT173DS-02 2-AXIS TABLE HB-17912

        $10,500 - Bethlehem, PA, USA
        • Manufacturer: SEC

        dimensions: 43.5″ (l-r) x 14″ (f-b) (20.5″ w/cable box attached to side) x 16.5″ (h) weight: 638 lbs