• SHEARS SCHIAVI BRG USED

    No price - Italy
    • Manufacturer: Schiavi

    blade length 2500 mm - cutting capacity of 12/16 mm - 700 mm inca - backgauge - angle adjustable cutting

  • CPT #3 BRG UNIT

    No price - Maple Grove, MN, USA

      cpt #3 brg unit

    • 2014 BRG HBL (RPM1009)

      $27,473 - Nottingham, United Kingdom
      • Manufacturer: BRG
      • Hours: 500 h

      hours: 500 h | engine: 15kw motor | country: united kingdom | division: construction equipment | attachments: hopper | gross weight: 17,637 lbs | production country: united kingdom | full service ...

    • 1250 Horsepower General Dynamic Motor Electrical ; Ac Motor #73877

      No price - West Windsor Township, NJ, USA Recently Added

        1,250 hp, 3565 general dynamic motor. 3/60/2300 volt. 282 amps, frame 685wsy, sn 60102133a2. service factor 115. 2 7/8" dia x 6" long shaft w/16" drop. de brg #804494-0-02, fe brg #804494-0-02. cod...

      • Amada BRG 3100 x 12 mm Hydraulic guillotine shears

        No price - Deinze, Belgium
        • Manufacturer: Amada
        • Weight: 10 ton

        15 mm on 1 meter depht: 2120 mm | height: 1810 mm | length: 3450 mm | weight: 10 ton | backgauge: electric | strokes/min: 16 > 64 | cuttinglength: 3100 mm | depht of throat: 500 mm | adjustable cut...

      • BRG 10/2000-A guillotine shear hydr. 2000 x 8 mm # 13483

        $8,908 - Wiefelstede, Germany
        • Manufacturer: BRG

        guillotine shear, shearing machine, plate shear, hydraulic shears, hydraulic shears  -hydraulic plate shear  cutting width 2000 mm  -max. slice thickness 13 mm  -blechhochhaltung - rear stop 1000...

      • 1400 GPM Dean Pump Steel Centrifugal Pump

        No price - Red Bank, NJ, USA
        • Manufacturer: Dean Pump

        unused 6 x 8 x 15-1/2 carbon steel centrifugal pump by metpro (dean pump div), model r4244, rated 1400 gpm at 200' tdh. 14.5" dia. impeller. s/n: 188691. 1800 rpm. radial brg. 6316, thrust brg. 731...

      • Amada BRG 3040 x 10 mm Hydraulic guillotine shears

        No price - Deinze, Belgium
        • Manufacturer: Amada
        • Weight: 13 ton

        type 3000b cutting cap steel 40-45kg/mm2: 1/2° at 3000 mm: 2 mm 1° at 3000 mm: 6 mm 2° at 3000 mm: 10 mm 2° at 2000 mm: 12 mm 3° at 1300 mm: 15 mm

      • 2001 John Deere 920F

        $17,000 - Dutzow, MO, USA
        • Manufacturer: John Deere
        • Model: 920F

        this head is in very good condition. it is a full finger head. poly skids appear to be good, the guards and sickle sections, stainless steel flex sheets, auger, reel teeth, bats and brgs. are good....

      • 2004 John Deere 637

        $23,000 - Dutzow, MO, USA
        • Manufacturer: John Deere
        • Model: 637

        2008 jd 637 disk, 26.5', 9 inch spacing, 11l-15 tires, hyd fore/aft leveling, brg wear guards, 18" 3 lobe finish blade, rear hitch