• Bridgeport Romi Powerpath CNC Lathe

    No price - Warren, MI
    • Manufacturer: Bridgeport

    condition info: good

  • EZ-Path Bridgeport Romi EZ-PATH CNC Lathe 17" x 40"

    $14,000 - Minneapolis, MN Recently Added
    • Manufacturer: Bridgeport

    model ez-path, s# 002-82037-325, date mfg. 03/14/97, 17" swing, 40" between centers, 24 spindle speeds from 37.5 to 3,000 rpm, 8" adjust tru 3 jaw chuck, ez path programmable dro, sliding...

  • EZ-Path II Bridgeport Romi EZ-PATH II CNC Lathe 20" x 40"

    $18,000 - Minneapolis, MN
    • Manufacturer: Bridgeport

    model ez-path ii, s# 016001665349, date mfg. 12/26/95, 20" swing, 40" between centers, variable speed spindle from 4 to 3,500 rpm, 2" thru hole, 9" 4 jaw set-tru chuck, ez path ...

  • EZ-Path II Bridgeport Romi EZ-PATH II CNC Lathe

    $22,000 - Minneapolis, MN
    • Manufacturer: Bridgeport

    model ez-path ii, s# 002-082770-349, date mfg. 10/31/97, 240v 3ph 60hz, more info coming soon

  • 1998 Bridgeport EZ PATH-S Romi

    No price - Chicago, IL
    • Manufacturer: Bridgeport

    control: bridgeport ez path | spinlde nose: a2-5″ | center height: 8.46″ | spindle drive: 7.5 hp | spindle speed: 26- 4,000.00 rpm | swing over ways: 17″ | max center distance: 40″ | hole through ...

  • 2000 Bridgeport EZ Path SD Romi

    No price - Chicago, IL
    • Manufacturer: Bridgeport
    • Distance between Centers: 40″

    8" adjustable chuck, tool holders quill: 4.7″ | x-axis: 295 in/min | z-axis: 384 in/min | control: bridgeport dx32r | low range: 25-1,000 rpm | feed rates: 0.01-200 in/min | high range: 100-4,000 r...

  • 1995 Romi/Bridge Port CNC/Manual Lathe

    $13,500 - Waterford Township, MI
    • Manufacturer: Romi

    spec sheet 16" x 40" bridgeport romi ez-path cnc/manual lathe swing over bed/ 16.5" swing over cross slide/ 8.6" distance between centers/ 40" cross slide travel ------ ( x )/ 8.6" longitudinal tra...

  • 1995 BRIDGEPORT / ROMI EZ PATH II CNC LATHE 2 1/2'' BORE, CHIP PAN, HONDA DRIVES, VISE, TAILSTOCK

    $5,599 - Euclid, OH
    • Manufacturer: Honda

    2 1/2'' bore, chip pan, honda drives, vise, tailstock, bridgeport ez path controller, *contains 2 pieces

  • 1995 Bridgeport Romi EZ Path

    No price - United States
    • Manufacturer: Bridgeport

    control ez path cnc control swing over ways 16.5" swing over cross slide 8" max center distance 40" center height 8" hole through spindle 2" spindle nose a2-5" spindle speeds (24) 37.5 - 3,000 rpm ...

  • ROMI / BRIDGEPORT EZ-PATH CNC LATHE W/BRIDGEPORT CONTROLLER, W/10" 3 JAW CHUCK W/TAIL STOCK

    $5,599 - Euclid, OH
    • Manufacturer: Bridgeport

    w/bridgeport ez path controller, w/10" 3 jaw chuck w/tail stock, w/dorian tool post 1 3/4" bore