Used celtic

- 35 listings found
Sort by Price: Low to High | High to Low
  • 2006 Claas Celtics 446 RC Farm Tractors

    • Manufacturer: CLAAS
    • Hours: 4200 h

    Contact the gear: mechanical | hours: 4200 h | power: 90 hp | drive wheels: 4 wd | condition info: good condition | wear of rear tires: 20% | wear of front tires: 15% | dimension of rear tires: 480 70 r 34 | dime...

    $27,178 (USD)
    France
  • Used Celtic 20 Muller and Pesant Threading lathe

        Spindle speeds length: 2870 mm | engine power: 8.5-5.5 hp | spindle speeds: 12.5 to 1000 rpm. | height of points: 250 mm | broach pierced to: 58 mm | taper of tailstock: cm 4 | approximate net mass: 1800 kg | tot...

        No price
        Marlenheim, France
      • Celtic 12

        • Manufacturer: Celtic
        • Spindle Bore: 35 mm

        Draaibank celtic - draaibank celtic 12 draailengte 800 mm. draaidiameter 300 mm. draai snelheden 35 / 1500 omw./min. digitale aflezing heidenhain

        No price
        Netherlands
      • Mondiale New Celtic 14 (12.046C1)

        • Manufacturer: Mondiale New Celtic
        • Spindle Bore: 35

        3-jaw chuck rohm Ø 200 mm rapid tool post emergency stop threading safety protection screen

        No price
        Nijkerk, Netherlands
      • Mondiale New Celtic 14 (12.048C1)

        • Manufacturer: Mondiale New Celtic
        • Spindle Bore: 35

        3-jaw chuck rohm Ø 200 mm rapid tool post emergency stop threading safety protection screen

        No price
        Nijkerk, Netherlands
      • Celtic 14 Tour

        • Manufacturer: Celtic

          Ep 800 - passage bench Ø 400 - passage carriage Ø 220 - pin Ø 30 - speeds 38 to 1600 - to standards

          No price
          Ouzilly, France
        • MULLER ET PESANT CELTIC 14

            • Distance between Centers: 750 mm

            Visu 2 axes height of centers: 185 mm | maximum swing in gap: 470 mm | maximum swing over bed: 365 mm | distance between centers: 750 mm | maximum swing over cross-slide: 205 mm

            No price
            Leers, France
          • MULLER ET PESANT CELTIC 14

              • Distance between Centers: 750 mm

              Chuck 3 jaws Ø 200 mm quick turret 2 fixed glasses

              No price
              Leers, France
            • Mondial Celtic 12 Ø 310 x 500 mm Centre lathes

              • Manufacturer: Mondial Celtic 12
              • Spindle Bore: 28 mm
              • Distance between Centers: 500 mm

              weight: 500 kg | accesories: yes | swing over bed: 310 mm | number of speeds: 35 > 1500 rpm | power on main spindle: 0,75/1,3 hp | swing over cross-slide: 185 mm | distance between centers: 500 mm | diametre of ...

              No price
              Deinze, Belgium
            • 2008 Mondiale New Celtic 14

              • Manufacturer: Mondiale
              • Spindle Bore: 35 mm

              overlay: 230 mm | peak height: 185 mm | spindle bore: 35 mm | quill diameter: 48 mm | cone of the tip: mk 3 | cone of the top: mk 3 | 27 metric threads: of 0.25 to 10 mm | adjustment slides: 235 mm | 54 withwort...

              No price
              Weilburg, Germany