• 2011 HAAS VF-3YT/50 VMC TK-20591

    $59,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    length:  52″ width:  23″ table capacity:  4,000 lbs drive: 40 hp, vector speed:  7,500 rpm taper:  cat-50 maximum torque: 236 ft-lb @ 700 rpm, 340 ft-lb @ 575 rpm drive system: 2-speed geared head ...

  • 1994 FADAL VMC20 VMC CK-20546

    $9,500 - Bethlehem, PA, USA
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01”-250” (375” at 150%) rapid feed rate (x/y/z): 400 ipm axis drive motor (x/y/z): dc, 1,800 lb thrust ballscrew size (x/y/z): 1.25” diameter x axis: 20” y-axis: 16” z-a...

  • 2004 FADAL 4020HT VMC CK-20545

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01″ – 400 ipm (600″ at 150%) rapid feed rate (x/y/z): 900 ipm (x, y) 700 (z) axis drive motor (x/y/z): ac 3,800 lbs (peak) thrust longitudinal (x-axis): 40″ cross (y-axi...

  • 1998 HAAS VF-4 VMC TK-20549

    $26,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length: 52″ width: 18″ maximum weight on table: 3,500 lbs t-slots width: .625″ center distance: 3.15″ taper size: #40 taper speed: 0 – 7,500 rpm transmission: 2-speed, geared head maximum torque (f...

  • 16176 2005 HURCO VERTICAL MACHINING CENTER VMX42S

    $36,500 - York, PA, USA
    • Manufacturer: Hurco

    hurco vertical machining center price: loaded on truck, our warehouse, york, pa ………… $36,500.00 hmc stock no. 16176 machine serial no. m444-06001085afd machine model no. vmx42s new date: 2005 tab...

  • Cincinnati Arrow 750 ERO

    $12,500 - Watertown, CT, USA
    • Manufacturer: Cincinnati

    make: cincinnati model: arrow 750 ero working table surface: 37" x 20" maximum table load: 1650 lbs. x-axis travel: 30" y-axis travel: 20" z-axis travel: 20" cutting feed rate: 590"/min. rapid trav...

  • Tree VMC800

    $12,900 - Watertown, CT, USA
    • Manufacturer: Tree

    make: tree model: vmc800 axis: 3-axis machining center table: 39.4" x 19.7" controller: dynapath x travel distance: 32" y travel distance: 16" z travel distance: 25" 110/230v 3 phase 60 hz good wor...

  • Willis 3280ENC

    $99,500 - Watertown, CT, USA
    • Manufacturer: Willis

    make: willis model: 3280enc anilam cnc g-code and conversational control max swing: 32" swing over cross-slide: 20" max center distance: 80" spindle bore diameter: 10" spindle nose: a2-20 spindle s...

  • Milltronics Partner I

    $12,000 - Watertown, CT, USA
    • Manufacturer: Milltronics

    make: milltronics model: partner i cnc vertical machining center table working surface: 45" x 16" x-axis travel: 30" y-axis travel: 16" z-axis travel: 19.5" spindle to column distance: 2" - 22" spi...

  • STRIPPIT FC 630 R FABRICANTER CNC TURRETT PUNCHING MACHINE USED

    $9,800 - Watertown, CT, USA
    • Manufacturer: Strippit

    strippit fc 630 r fabricanter cnc turrett punching machine used purchased new in 1992 / 1 owner / was running when taken from service excellent condition equipped with mac 11 pc based cnc cont!01 a...