Used cincinnati gilbert

- 44 listings found
Sort by Price: Low to High | High to Low
  • Cincinnati Gilbert Series DT

    • Manufacturer: Cincinnati
    • Spindle Diameter: 5"

    x-axis: 84 | y-axis: 72 | z axis: 36 | spindle speed: 1450 | spindle taper: 50 | spindle diameter: 5" | spindle drive motor: 25

    No price
    Smyrna, TN, USA
  • Cincinnati Gilbert

    • Manufacturer: Cincinnati
    • Spindle Diameter: 6"

    72" x 250" cast iron floor plate table maximum: 1000 rpm | spindle motor: 40 hp | spindle taper: mt | spindle diameter: 6" | z-axis (spindle): 36" | y-axis (vertical): 120" | speeds minimum (rpm): 10 rpm | x-axis...

    No price
    Smyrna, TN, USA
  • 4' X 11" CINCINNATI GILBERT RADIAL DRILL NEW 1952, POWER CLAMPING TO HEAD,

    • Manufacturer: Cincinnati

      New: 1952 s/n: 5782 specifications: arm length............................... 4' column diameter.......................... 11" drills on base to center of circle....... 8' column face to spindle (min.)..............

      No price
      Bedford, OH, USA
    • Cincinnati-Gilbert Macrocenter 22173

      • Manufacturer: Cincinnati

        Equipped with: fanuc 18-m cnc control fanuc red cap servo motors full pendant for manual operation 3-way column power draw bar ball screws & independent servo drives sliding steel way covers on x-axis right angle...

        No price
        Melville, NY, USA
      • Cincinnati-Gilbert Airlift 23430

        • Manufacturer: Cincinnati

          Equipped with: 90 degree, 4-position, positive stop shot pin 360 degree scale with 1/2 degree increments fixture locating keyway degree increments fixture locating keyway center bore in table platen

          No price
          Melville, NY, USA
        • 1997 Cincinnati Gilbert HJF

          • Manufacturer: Cincinnati
          • Spindle Diameter: 5.37"
          • Control: Fanuc 15MB

          feeds: .05-100ipm | control: fanuc 15mb | comments: immediately available | cross travel: 360" | runway width: 45" | spindle taper: #50 nmtb | spindle speeds: .05-1,000 rpm | spindle travel: 36" | vertical trave...

          $69,500 (USD)
          Elk River, MN, USA
        • CINCINNATI GILBERT 5" CNC 5 AXIS HORIZ BORING MILL, NASA BORING MILL

          • Manufacturer: Cincinnati

            Retrofited with new camsoft 6 axis 2012 cnc control , wireless keyboard and mouse 60" built in heavy rotary table with detachable 48" horiz table hard limit max 84" y, 76" x , 78" z(column) , 35" w (spindle) cnc ...

            No price
            Cleveland, OH, USA
          • 36″ x 36″ CINCINNATI-Gilbert Manual Rotary Table,

            • Manufacturer: Cincinnati

              36″ x 36″ cincinnati gilbert manual rotary table table size: 36″ x 36″ | t-slots (4): 2″ | table height: 11.5″ | approx. weight: 5700 lbs | table rotation: 360 degrees | base plate diameter: 36″

              No price
              Bannockburn, IL, USA
            • 1993 CINCINNATI-GILBERT DF

              • Manufacturer: Cincinnati
              • Spindle Diameter: 5"

              Fanuc 15m control 72" x 60" airlift rotary table on in-feeding side 42" x 42" 4-pos prog. table on in-feeding side power draw bar ballscrews red cap fanuc servo motor operator's platform telescoping steel way cov...

              No price
              Waukesha, WI, USA
            • 5" CINCINNATI GILBERT BORING MILL

              • Manufacturer: Cincinnati
              • Control: YES

              Serial ................................. 168-j diameter of spindle .................... 5" spindle travel ......................... 36" spindle speeds ......................... 10 to 1000 rpm spindle feeds .........

              No price
              Holland, OH, USA