• 2004 CK CK A 6150

    $19,500 - Grand Rapids, MI, USA Recently Added
    • Manufacturer: CK
  • 1976 CINCINNATI 5FL12 HYD SHEAR CK-20519IP

    $34,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Cincinnati
    • Capacity: 5/8” X 12’
    • Weight: 53,000 LBS

    front operated power backgauge 10’ squaring arm (18) front supports electric foot switch adjustable rake angle since we are acting as a broker on this machine, it is being sold “as is” “where is” m...

  • 2004 FADAL 4020HT VMC CK-20545

    $24,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01″ – 400 ipm (600″ at 150%) rapid feed rate (x/y/z): 900 ipm (x, y) 700 (z) axis drive motor (x/y/z): ac 3,800 lbs (peak) thrust longitudinal (x-axis): 40″ cross (y-axi...

  • 2016 CK POWER 50 KW

    $36,900 - Lyon Charter Township, MI, USA
    • Manufacturer: CK POWER
    • Hours: 355

    tier 4 final, 50kw mobile generator hours: 355

  • 1994 HARDINGE EC-12-0750 HYDRODYNAMIC BARFEED DK/CK-14549

    $3,450 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Hardinge
    • Capacity: 3/4″ X 12′

    rotating multi tube design with 4 tubes size: 3/4" x 12' | max. capacity: 3/4″ x 12′

  • 1979 SHARP VH2 VERT/HORZ MILL CK/TK-19748

    $17,900 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Sharp

    vertical spindle: 3 hp horizontal spindle: 2 hp table longitudinal feed: 4 hp coolant pump: 1/8 hp spindle nose: 40 nst spindle speeds: 60 – 4,500 rpm quill travel: 5” vertical feeds: .04, .08, .16...

  • PINES 3/4" HORZ TUBE BENDER CK-19468

    $4,950 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Pines

    dimensions: 19’ lr x 3’ fb x 3’ h electrics: 440 volts, 3 ph, 60 cyc mandrel extractor

  • 1998 CLAUSING CSG-618 SURFACE GRINDER CK-20548

    $7,950 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Clausing
    • Grinding Length: 19″

    maximum travel, manual: 20″ manual transverse travel, max.: 7-3/4” hand wheel per revolution: 0.2″ hand wheel per graduation: 0.001″ hand wheel per revolution: .04″ hand wheel per graduation: .0002...

  • ROCKWELL MULTI SPDL DRILL CK-19397

    $1,250 - Bethlehem, PA, USA
    • Manufacturer: Rockwell

    jacobs chucks size: 15" 2 spindle | column: 3” wide x 38” high | step pulley: 5 steps | coolant table: 24” x 28” | drill to center of circle: 15”

  • DAKE JOHNSON JH10W3 HORZ BANDSAW CK-20167

    $3,600 - Bethlehem, PA, USA
    • Manufacturer: Dake
    • Motor: 1 HP

    floor space: 29” x 70” height, closed: 39” height, open: 63” floor to bed: 23.75” weight: 935 lbs wired at: 460 volts, 3 ph, 60 cyc can be: 208-230 volts, 3 ph, 60 cyc 5” x 11” vise magnetic starte...