• ----------------- HARDINGE ------------------------ COBRA 42

    No price - Waukesha, WI, USA
    • Manufacturer: Cobra
    • Spindle Nose: ----------------- A2-5

    fanuc 21t 32-bit cnc control with 9" crt rs-232c port interface for dnc operation harmatic barfeed with interface standard coolant system with tank & pump all available tool holders, all available ...

  • Pacific Precision Labs (Cobra) 6"x6" stepper stage, cross roller, 2 pitch ball screw Compumotor LE57-51 motors & drives,

    $4,250 - Salem, MA, USA
    • Manufacturer: Cobra

    pacific precision labs (cobra) 6"x6" stepper stage, cross roller, 2 pitch ball screw compumotor le57-51 motors & drives, 12 x 12 x 4" thick.

  • HARDINGE Cobra 51

    No price - Livonia, MI, USA
    • Manufacturer: Cobra

    : date ofmanufacture 2000 maximum swing  21" maximum turning diameter  8.25" maximum turning length  14" xaxistravel  7.75" zaxistravel  14.0" rapid traverse rate x axis  472ipm rapid traverse  rat...

  • 2015 Cobra FG30 LP Gas Pneumatic Tire

    $25,900 - Syracuse, NY, USA
    • Manufacturer: Cobra

    ssfp, 60"forks, rain guard fuel: lp gas | capacity: 6000 | mast spec: 86.5/184 | mast type: three stage

  • COBRA BUSCH 91400

    No price - La Porte, TX, USA
    • Manufacturer: Cobra

    qty: 1 | size: 4x3 | alloy: c | material: cs

  • 1999 Hardinge Cobra 42

    No price - Loveland, OH, USA
    • Manufacturer: Hardinge
    • Model: COBRA 42

    spindle speed range (1 rpm increments) 50-5000 rpm equipped with:

  • 1997 Hardinge Cobra 42

    No price - Loveland, OH, USA
    • Manufacturer: Hardinge
    • Model: COBRA 42

    1997 hardinge cobra 42 cnc lathe . specifications: max swing over bed 21" max od turning capacity w/standard tooling 8.25" max machinable center distance 14" cross travel (x-axis). 7.75" longitudin...

  • Cobra 124 GPM Pump 7026

    No price - Red Bank, NJ, USA
    • Manufacturer: Cobra

    used busch type ac0200ad21xxzzc cobra vacuum pump. free air displacement 124 cfm. nominal pumping speed 97 acfm. unit driven by 5.5kw (7.5 hp), 415v, 925-2890rpm invertor rated flameproof electri...

  • Dake MEP Cobra 350 CNC-FE

    $12,500 - South El Monte, CA, USA
    • Manufacturer: Dake

    cobra 350 cnc-fe controller fully enclosed air vise conveyor

  • 2007 International 7300

    $69,900 - Manassas, VA, USA
    • Manufacturer: International
    • Model: 7300

    gvw: 33,000 | color: blue | odometer: 248,316 | body make: new way | rear axle: 23,000 | body model: cobra | front axle: 10,000 | attachments: 2 cart tippers | engine make: international | engine ...