• 2005 Daewoo Doosan Diamond Series DMV 3016 3221

    • Manufacturer: Doosan
    • Spindle Taper: Cat 40 Taper
    • Control: Fanuc Oi-MB Series CNC Control

    fanuc oi-mb series cnc control, cat 40 taper, 24 station twin arm automatic tool changer, 8,000 rpm spindle, remote jog hand wheel, spindle chiller, standard coolant system, manuals.

    No price
    Plymouth, MN, USA
  • 1998 Doosan - Daewoo 250B 6021

    • Manufacturer: Doosan
    • Spindle Bore: 3.540
    • Spindle Nose: ASA-A2-8

    x-travel: 11.10 | z-travel: 26.80 | tailstock: yes | chuck size: 10.00 | coolant psi: 90 | bar capacity: 3.000 | spindle bore: 3.540 | spindle nose: asa-a2-8 | spindle motor: 35 | spindle speed: 3,500 | rapid tr...

    No price
    Maitland, FL, USA
  • DOOSAN DAEWOO LYNX 220C CNC LATHE

    • Manufacturer: Doosan
    • Spindle Bore: 2.99″
    • Spindle Nose: A2-6″

    doosan daewoo lynx 220c cnc lathe new 2006 motor driven with 20 hp, 3-phase, 60 cycle spindle motor equipped with: fanuc i series cnc controls, rs 232 port, 8″ 3-jaw chuck, 12 position turret, md chip conveyor, c...

    No price
    Bannockburn, IL, USA
  • 2010 DOOSAN / DAEWOO LYNX 220C

    • Manufacturer: Doosan
    • Spindle Bore: 2.99"
    • Spindle Nose: A2-6

    fanuc i series cnc control 10.4" color lcd pc/mcia interface 8" hydraulic chuck auto parts catcher iemca kid 80 short magazine barfeed tool presetter rigid tapping chucker (no tailstock) mfg date march 2010

    No price
    Fort Mill, SC, USA
  • 2012 DOOSAN / DAEWOO LYNX 220LMA

    • Manufacturer: Doosan

      fanuc 0it cnc control 10.4" color lcd pc / mcia interface c-axis milling capability 6" samchully mh-206 hydraulic chuck collet chuck auto parts catcher tool presetter tailstock with programmable quill chip convey...

      No price
      Fort Mill, SC, USA
    • 2010 DOOSAN DAEWOO SOLAR 225 LC V

      • Manufacturer: Doosan
      • Model: SOLAR 225 LC V
      • Hours: 6,418

      cab, a/c, reach boom, doosan dl06 engine, digging bucket

      $59,000
      North East, PA, USA
    • 2006 Doosan Daewoo Lynx 220LC #7043705-01

      • Manufacturer: Doosan

        2006 doosan daewoo lynx 220lc, cnc two axis turning center, serial no: l2201245, w/ fanuc i series control this unit is being sold “as is, where is”. offers are welcome! can be inspected by appointment only. ple...

        $27,500
        Texas, United States
      • 2007 DAEWOO PUMA 280 - FANUC 21i-TB

        • Manufacturer: Daewoo

          specifications: maximum swing over bed/carriage 23"/ 4.5" maximum machining diameter 15.7" maximum machining length 25" maximum bar capacity 3.5" x axis travel 11.1" z axis travel 26.8" rapid traverse rates x, z ...

          $42,500
          Hubbard, TX, USA
        • 2001 6" chuck Daewoo Doosan Puma Model 160-GL CNC Gang Style Lathe

          • Manufacturer: Doosan
          • Spindle Bore: 2.8"

          gang style, gantry load, collet chuck, fanuc 0t cnc control

          No price
          Elk Grove Village, IL, USA
        • 2014 DOOSAN PUMA 2100MC

          • Manufacturer: Doosan

            fanuc 0i-td cnc control 10.4" color lcd manual guide i c-axis milling capability 8" hydraulic 3-jaw chuck servo driven turret auto tool presetter programmable tailstock auto parts catcher barfeed interface three ...

            No price
            Fort Mill, SC, USA