• Davis #5 7075P

    • Manufacturer: Davis

      - tilting table - resistance arm - work holding fixture - horsepower: 2

      $4,950
      Painesville, OH, USA
    • 36″ Giddings & Lewis Facing Head Davis

      • Manufacturer: Giddings & Lewis

        drive ring boring bar & holder feeds: 0.0029 / .039 ipr | diameter: 36″ | hold diameter: 6″ | weight (approx.): 1,800 lbs | bolt hole spacing: 6″ | max. facing diameter: 48″ | tool slide cross travel: 12″

        No price
        Spencer, MA, USA
      • 2000 Giddings & Lewis Davis 23429

        • Manufacturer: Giddings & Lewis
        • Weight: 1800 lbs

        serial number: 307-90174-00 54" facing diameter boring bar & holder drive ring boring bar & holder storage crate located in our philadelphia, pa warehouse

        No price
        Melville, NY, USA
      • USED NRM / DAVIS STANDARD 16125

            nrm / davis standard 1.5″ pacemaker iv extruder, s/n 19218, s/o 52660, 24:1 l/d air cooled electrically heated barrel with a 42″ to 44 3/4″ adjustable centerline, driven by a 10 hp 1750/2300 rpm d/c motor, relia...

            No price
            Elk Grove Village, IL, USA
          • 48” WIDE WELEX / DAVIS 14888

                one used 48” x 24” welex/davis standard sheet extrusion line consisting of the following:a. 2.5” 24:1 l/d welex extruder having an electrically heated water cooled barrel at a 60” centerline height. gearbox is a ...

                No price
                Elk Grove Village, IL, USA
              • 9.5" DAVIS-STANDARD BARREL HEATERS

                • Manufacturer: Davis-Standard

                  one (1) used set of 9.5" davis-standard barrel heaters, cast aluminum, water cooled, 12 kw at 230v.

                  No price
                  Cleveland, OH, USA
                • 66" DAVIS-STANDARD SHEET STACK

                  • Manufacturer: Davis-Standard

                    used davis-standard sheet stack with 66" wide x 18" diameter three roll vertical stack, cored rolls with rotary unions, 2 hp dc drive motor, pneumatically adjustable first and third rolls, temperature distributio...

                    No price
                    Cleveland, OH, USA
                  • USED MERRITT DAVIS 8″ X 16051

                    • Manufacturer: Merritt

                      used merritt davis model 80 belt puller, s/n wc04415-23, 8″ wide x 108″ belt contact area, top and bottom belts are driven by drive shaft from approximately 15 hp motor, manual hand crank gap adjustment with a...

                      No price
                      Elk Grove Village, IL, USA
                    • USED MERRITT DAVIS 6″ 24:1 16050

                      • Manufacturer: Merritt

                        used 6″ merritt davis 24:1 l/d extruder, s/n wc04415-03, non-vented air cooled electrically heated barrel, approximately 10″ x 10″ top center feed with starve feeder mounted in place. driven by 300 hp 1785 rpm ...

                        No price
                        Elk Grove Village, IL, USA
                      • USED MERRITT DAVIS 1.5″ 24:1 16049

                        • Manufacturer: Merritt

                          used 1.5″ merritt davis pedestal co-extruder, s/n 04415-08, 24:1 l/d non-vented air cooled barrel, adjustable centerline height, self-contained temperature panel with (6) eurotherm model 2208e instruments. extru...

                          No price
                          Elk Grove Village, IL, USA