• ENGEL M-825 #6414

    No price - Baltimore, MD, USA
    • Manufacturer: Engel

    engel snap-lock/button-lock roll former  with s-slip & drive cleat model:  m-825 s/n:  869-89 made in the usa read the engel 825 roll forming machine pdf here specifications: capacity: 22 gauge for...

  • Engel Full Coil Line

    No price - Charlotte Hall, MD, USA
    • Manufacturer: Engel

    shipping is additional, tear down and set-up/training can be quoted if needed.

  • ENGEL MODEL ES330/100 100 TON INJECTION MOLD MACHINE #M5483

    No price - Warren, MI, USA
    • Manufacturer: Engel

    year new…….. 1997 equipped with: cc100 control core pull hydraulic ko robot interface

  • Engel Mdl. ES200H80L/65HL2F Injection Mold Machine

    $19,500 - Morrisville, PA, USA
    • Manufacturer: Engel

    year - 1994 65-ton, 2 oz. + 1.2 oz. tie-barless two-color type platen size: 25.98" x 21.65" daylight: minimum 9.8" / maximum 17" dimensions (clamp) 171.26"l x 48"w x 84"h dimensions (1st inj. unit)...

  • Engel Rollforming Machine #2642

    No price - Ronkonkoma, NY, USA
    • Manufacturer: Engel

    used engel rollforming machine model 835 male and female button lock rolls, 20-26 ga. also, includes: 1-1/8" government lock rolls - center position electrics: 208 volt, 3 phase, 5 hp price: $$call...

  • 1998 Engel - 10000/990WP (1998) - 1000 Ton, 259 oz. ENGEL Injection Molding Machine

    No price - Worcester, MA, USA
    • Manufacturer: Engel

    type: wide-platen | control: cc100 | options: core pull, hydraulic ko | tonnage: 1000 | voltage: 460/3/60 | shot size: 259 oz. | platen size: 83.2" x 68.5" | max daylight: 86.5" | tie bar distance...

  • 2002 Engel - ERC 53/1-E (2002) - Engel ERC 53/1-E Robot

    No price - Worcester, MA, USA Recently Added
    • Manufacturer: Engel

    fla: 13.4 | c-axis: pneumatic | x-axis: 700mm | y-axis: 1300mm | z-axis: 5240mm | payload: 33 lbs. | voltage: 230/3/60 | includes: euromap 12 interface; (2) switchable circuits vacuum/gripper; (8)...

  • 1999 Engel - ES200H/200H/100TL 2C (1999) - 100 Ton, 2.2 oz & 2.2 oz. ENGEL Two-Shot Tiebarless Injection Molding Machine

    No price - Worcester, MA, USA
    • Manufacturer: Engel
    • Screw Diameter: 25mm & 25mm

    type: two-shot tiebarless | control: cc-100 el a03 | options: core pull circuit, dual air blow, spi robot interface | tonnage: 100 | voltage: 460/3/60 | shot sizes: 2.2 oz & 2.2 oz. | platen size:...

  • 2015 Engel - e-motion 2440/420 T US (2015) - 420 Ton, 40.34 oz. ENGEL All-Electric Injection Molding Machine

    No price - Worcester, MA, USA
    • Manufacturer: Engel
    • Screw Diameter: 70mm

    note: partial workflow continuance is available; 5-year facility lease (houston, tx) also available | hours: under 500 | control: cc300 | options: increased plasticizing speed; bi-metallic barrel;...

  • Engel Slip and Drive Cleat Rollformer #2667

    No price - Ronkonkoma, NY, USA
    • Manufacturer: Engel

    used engel slip and drive cleat rollformer model 825 tooled for: reinforced 's' cleat and drive cleat male and female snap lock approx. forming speed : 90 fpm electrics: 5 hp, 230 volt, 3 phase app...