Used espe

- 24 listings found
Sort by Price: Low to High | High to Low
  • 1992 ESPE CNTA 4000/12 Hydraulic Shear

    • Manufacturer: ASPEN
    • Capacity: 52 KvA
    • Weight: 27800

    Hydraulic shear espe cnta 4000/12 used machine kb-1714 aspen cnta 4000 / 12 hydraulic plate shears, used machine, 4000 x 12 mm (st x 70), max cap. 20mm article number: kb-1714 brand: aspen model: cnta 4000 / 12 y...

    $18,834 (USD)
    Boxmeer, Netherlands
  • 1990 ESPE/PIESOK CNTA 3150/16A Cutting shears 9713

    • Manufacturer: Piesok

      Motorized back gauge linear guided 15 balls in table, 1 side lay 3 sheet support arms 15 hyd. hold down units two hand control 2x hydraulic cylinders have new seals users manual partly in german, czech does not c...

      $25,457 (USD)
      Wiener Neudorf, Austria
    • 1985 ESPE CNTA 3150/10 A

      • Manufacturer: ESPE

        Maximum thickness of cut sheet strength 450 mpa 10 mm minimum thickness of plates 1 mm the maximum length of 3150 mm cut sheet unloaded in the stands 350 mm shear angle 0,5-2,5 ° adjustment backstop 10-1000 ...

        No price
        Blansko, Czech Republic
      • 1992 Espe CNTA 4000/12

        • Manufacturer: Espe

          Kb-1714 espe cnta 4000 / 12 hydraulic shears, used, 4000 x 12mm (st x70), max cap 20mm articlenumber : kb-1714 make : espe model : cnta 4000 / 12 year : 1992 serial no : n99-002 capacity (kw) : 52 kva voltage : 3...

          $18,857 (USD)
          Netherlands
        • 1995 Espe CTO 125 #171124

          • Manufacturer: Espe

            ref: 171124 | bending power: 125 t | bending length: 3150 mm | machine weight: 10000 kg | main motor power: 11 kw | type of press drive: hydraulický | machine dimensions l x w x h: 3830 x 1540 x 2650 mm

            No price
          • 1990 ESPE CNTA 2000/6,3 A

            • Manufacturer: ESPE

              Max plate thickness mm 6,3 min plate thickness mm 0,63 angle of bent of cutting knife edge degr max length of cutting mm 2000 total machine output kw 11,0 9a927rsoe machine dimensions mm 2650 x 2350 x 2000 machin...

              $6,718 (USD)
              Czech Republic
            • 1982 Espe XRM 2000/6,3 #171123

              • Manufacturer: Espe

                Very good technical condition. ref: 171123 | machine weight: 12 200 kg | width of plate: 2000 mm | main motor power: 20 kw | max. plate thickness: 6,3 mm | machine dimensions l x w x h: 4500 x 1360 x 2300 mm | di...

                No price
              • 1981 Espe XRM 2000/6,3 #131658

                • Manufacturer: Espe

                  The machine is in stock, not under power, isn´t possible test it. before disconnecting fully functional in line.

                  No price
                • 2006 3M ESPE LAVA THERM FURNACE YR

                  • Manufacturer: 3M

                    Yr 2006 bay: 1700 | aisle: 09b | weight: 140 | capacity: 1600° c | electric: 3/50/60/230

                    $499 (USD)
                    Euclid, OH, USA
                  • 1981 Müller-Mitteltal VA-2 Blatt-Federung,Bordwände

                    • Manufacturer: Müller-Mitteltal

                      We sell a müller-mitteltal va-2 as flatbed trailer from year: 1981 with: drum brakes leaf spring suspension espe axes tire size: 365/80 r22.5 bordwände internal dimensions: length: 7.10m, width: 2,43m, height: 2....

                      $2,356 (USD)
                      Beckum, Germany