• Yuken Kogyo Co. A16-F-R-01-H-K-32

    • Manufacturer: Yuken Kogyo Co.

      package consists of an "a" series yuken kogyo variable displacement piston pump direct-driven by a 7.5hp, 230/460 volt, 1775rpm, 3 phase inverter duty ac motor. oil cooling provided by a 2 pass rear mount heat e...

      $1,950
      Millwood, WV, USA
    • Graphilor/Carbone K-4545 serial # 10326 #221069

      • Manufacturer: Graphilor/Carbone
      • Capacity: 45 SQUARE FOOT / 4 SQUARE METER

      45 sq ft, graphite block heat exchanger manufactured by graphilor/carbone. model # k-4545 serial # 10326, carbone # c063665. service side rated for 75 psi at 350 degrees f, process side rated for 75 psi at 350 de...

      No price
      West Windsor Township, NJ, USA
    • P-K not applicable 11578

      • Manufacturer: P-K

        used patterson-kelley twin shell vacuum tumble dryer, 75 cubic feet, 304 stainless steel. (2) 18" diameter top charge ports with quick release covers. 48" diameter x 72" deep, rated full vacuum, carbon steel jack...

        No price
        Red Bank, NJ, USA
      • K R Wilson - Transfer Press | 140 Ton 6869P

        • Manufacturer: Wilson
        • Stroke: 18"

        - digital 0- 180 minute compress/transfer hold control - digital 72 hour timer - omega programmable digital temperature controls - variable compression- transfer & ejector controls - oil temperature gauge

        $34,500
        Painesville, OH, USA
      • 1975 B & K 4P-16-01 5958

        • Manufacturer: B & K

          - wichita air clutch & brake - horsepower: 15 tonnage: 60 | ram stroke: 4" | slug chute: 37" x 4" | passline height: 38" | max. shut height: 21" | min. shut height: 18" | strokes per minute: 30 | bed size (l-r, f...

          $37,500
          Holland, OH, USA
        • 52" X 10 GA. D & K HYDRAULIC SHEAR

          • Manufacturer: D & K

            used 52" x 10 ga. dreis & krump hydraulic shear mfd. 2009 model no. hs410 capacities: 52" x 10 ga. mild steel length of knives: 53-1/2" distance between housings: 60-1/2" floor to top of bed: 32" s.p.m. approx.: ...

            No price
            Elk Grove Village, IL, USA
          • 10 FT. X 16 GA. D & K HYDRAULIC BRAKE

            • Manufacturer: D & K

              used 10 ft. x 16 ga. dreis & krump hydraulic brake speedibender model no. sba-104 bending capacities: 10' x 16 ga. mild steel 6' x 14 ga. mild steel tonnage capacity: 25 tons overall length of bed & ram: 122" dis...

              No price
              Elk Grove Village, IL, USA
            • 6 FT. X 1/4" D & K HYDRAULIC SHEAR

              • Manufacturer: D & K

                used 6 ft. x 1/4" dreis & krump hydraulic shear model no. uhs6250 capacity: 6' x 1/4" mild steel length of knives: 81" distance between housings: 92-1/2" gap: 2" rake angle: 7/16" holddowns: 13 holddown pressure:...

                No price
                Elk Grove Village, IL, USA
              • 10 FT. X 1/4" D&K HYDRAULIC SHEAR

                • Manufacturer: D & K

                  used 10 ft. x 1/4" dreis & krump hydraulic shear model no. ua-10250 capacity: 10' x 1/4" mild steel length of knives: 122" distance between housings: 134.5" gap: 2" rake angle: 1/8" - 7/16" holddowns: 18 holddown...

                  No price
                  Elk Grove Village, IL, USA
                • NASH K-5 66984

                  • Manufacturer: Nash

                    vent gas compressor; suction - 15.3 psia @ 113 deg f; exhaust - 19.2 psia @ 120.8 deg f; 690 blower rpm; 230/460 volts;

                    No price
                    La Porte, TX, USA