• 2002 FACCIN RCMI 170 A2484500

    No price - Berlin, Germany
    • Manufacturer: FACCIN

    section modulus : 10 in3 . shaft diameter : 6.7 " roller diameter : 18.9 " speed ​​(stepless) : 0 - 16 ft / min installed power : 35 ps angle ( leg out ) capacity : 6 x 1/2 '' ( 60 " diameter ) fre...

  • 2006 FACCIN MA 50 Manipulator for dishing press

    No price - Visano, Italy
    • Manufacturer: FACCIN

    max. blank diameter mm 5.000 min. blank diameter mm 1.500 max. capacity kg 7.000 total power installed hp 25 blank rotation speed m/min. 25 up-down speed for support arms m/min. 12 volt...

  • FACCIN 4HEL-3146

    No price - Dodge Center, MN, USA
    • Manufacturer: FACCIN

    faccin (new) model 4hel-3146 4 roll plate bending roll number of rolls ......... 4 geometry ................ linear slides maximum plate width ..... 120.08" roll diameter top roll .............. 18...

  • Faccin 4HEP

    No price - Visano, Italy
    • Manufacturer: FACCIN

    standard equipment: linear guides design (rgs) for small sizes planetary swinging arms design (psg) for medium and big sizes 4 independent bearings supporting the pinching roll (mcs) pinching roll ...

  • Faccin TAURUS

    No price - Visano, Italy
    • Manufacturer: FACCIN

    taurus is the series of variable geometry bending rolls designed by faccin with special design with 3 independently motorized rolls: the side rolls move horizontally while the central one moves ver...

  • Faccin ASI

    No price - Visano, Italy
    • Manufacturer: FACCIN

    standard equipment: two motorised rolls induction hardened rolls polished roll surface motorised pre-bending and bending bending roll tilt rolls with extensions for bending profiles mobile pedal co...

  • Faccin HCU

    No price - Visano, Italy
    • Manufacturer: FACCIN

    standard equipment: lower roll in polyurethane for perfect prebending automatic processing cycle (about 20 seconds/piece) special lower roll lifting system standard roll for minimum diameter siemen...

  • Faccin RCMI

    No price - Visano, Italy
    • Manufacturer: FACCIN

    standard equipment: motorised fine adjustment of universal roll height; independent adjustment of the two bending rolls (double pinch); independent side checkers 3d adjustable in 6 directions; simu...

  • Faccin 3HEL

    No price - Visano, Italy
    • Manufacturer: FACCIN

    standard equipment: linear guides for roll movement (rgs) 4 independent bearings supporting the lower rolls (mcs) bearing seats with double width (whs) electronic synchronisation of roll parallelis...

  • Faccin 4HEL

    No price - Visano, Italy
    • Manufacturer: FACCIN

    standard equipment: linear guides for roll motion (rgs) 4 independent bearings supporting the lower rolls (mcs) bearing seats with double width (whs) electronic synchronisation of roll parallelism ...