search
  • FALLS FINISHERS

    $2,950 - Dodge Center, MN
    • Manufacturer: FALLS
    • Capacity: 24 GA X 1/4"

    (used) falls d-burr model 111 deburrs bottom edge in one pass capacity,,,,,,,,,,,,,,,,,,,,,,, 24 ga x 1/4" thickness width,,,,,,,,,,,,,,,,,,,,,,,,,, 1/2" to 48" length,,,,,,,,,,,,,,,,,,,,,,,,, 4" -...

  • FALLS DEBURRING MACHINE

    No price - Elk Grove Village, IL Recently Added

      falls deburring machine model no. 111 for steel, stainless steel, aluminum, brass, etc. capacity: 14 ga. to 1/4" thickness width: 1/2" to 4' or more length: 4" to 10' or more speed approx.: 60 fpm ...

    • Falls 111 1992

      No price - Hamilton, MI Recently Added
      • Manufacturer: Falls
      • Capacity: 1/2" to 4' or More

      voltage: 110 | capacity width: 1/2" to 4' or more | capcity length: 4" to 10' or more | capacity thickness: 24 gauge - 1/4"

    • 2001 SENECA FALLS EW 75

      No price - Waukesha, WI
      • Manufacturer: SENECA FALLS

      air supply: 80 psi | bed way width: 4" | spindle taper: #50 nmtb | loading height: 43" | spindle speeds: 10 - 1750 rpm | max traverse rate: 400 ipm | swing over bed ways: 22" | spindle center dist...

    • Falls Metal Products 121 #24041

      No price - Monclova, OH Recently Added
      • Manufacturer: Falls Metal Products

      model: 121 sn: 1848 1″ wide capacity power feed powered brush annual height adjustable on top finishing rolls 110 volt flip up material support good condition

    • Falls Edge D-Bur-r, Model-111

      No price - Elk Grove Village, IL
      • Manufacturer: Falls
      • Capacity: 1/2" to 4' or more

      electrics: 115 volt | capacity width: 1/2" to 4' or more | condition info: good | capacity length: 4" to 10' or more | capacity thickness: 24 ga. to 1/4" | overall dimensions: 50" h x 36" w x 26"d

    • 2015 WILSON Fall Harvest Hopper Rental 4 Months

      $1,100 - Middle Point, OH
      • Manufacturer: Wilson

      2000-2014 model years. as low as $1100.00/month rental w/4 month minimum! w/$1000.00 deposit.(plus $.05/mile commercial use only!) limited area of availability w/approved credit. you provide insur...

    • 2015 WILSON Fall Harvest Hopper Rental 4 Months

      $4,400 - Middle Point, OH
      • Manufacturer: Wilson

      2000-2014 model years. as low as $1100.00/month rental w/4 month minimum! w/$1000.00 deposit.(plus $.05/mile commercial use only!) limited area of availability w/approved credit. you provide insur...

    • FALLS MODEL 111 "D-BUR-R" EDGE DEBURRING MACHINE 15082

      No price - Des Plaines, IL
      • Manufacturer: FALLS

      will deburr bottom edge of sheet in one pass wire brush toggle switch for on/off casters 1/3 hp 115/1/60 brush motor 1/4 hp 115/1/60 gear motor

    • FALLS 1/4" #131 1/4" MODEL #131 D-BUR-R DEBURRING MACHINE

      No price - Holland, OH
      • Manufacturer: FALLS
      • Capacity: 1/2" TO 48"+

      serial ................... 2876 model .................... 131 d-bur-r top & bottom edges ....... yes thickness capacity ....... 24 gauge to 1/4" width capacity ........... 1/2" to 48"+ length capa...