Used ferromatik

- 68 listings found
Sort by Price: Low to High | High to Low
  • 1996 Ferromatik K50

    • Manufacturer: Ferromatik

      50 metric ton / 55 us ton, 2.54 oz. ferromatik milacron model: k50 equipped w/ ranger robot, model: spr-60t the following information was provided by the manufactruer:   ferromatik milacron , k50     clos...

      $3,950 (USD)
      Statesville, NC, USA
    • 1994 Ferromatik K30

      • Manufacturer: Ferromatik

        30 metric ton, 33 us ton,  1.45 oz. ferromatik milacron model: k30 equipped w/ yushin sprue picker, model: hop iii-a550 the following specs were provided by the manufacturer:   closing unit metric us c...

        $3,450 (USD)
        Statesville, NC, USA
      • 1998 Ferromatik Milacron - K450-S/2F (1998) - 500 Ton, 47.5 oz. Ferromatik Milacron Injection Molding Machine

            control: xtreem | options: core pull, robot interface | tonnage: 500 us | voltage: 460/3/60 | shot size: 47.5 oz. | platen size: 50" x 50" | clamp stroke: 39.36" | max daylight: 55.16" | ejector stroke: 7.87" | ...

            No price
            Worcester, MA, USA
          • Ferromatik K 320 S

            • Manufacturer: Ferromatik
            • Screw Diameter: 70 mm
            • Clamping Force: 3200 kN

            Ferromatik k 320 s used machine make: remote romatic milacron type: k 320s year of construction: 1994 machine number: 560002 control: location: poland country of origin: germany/germany technical data screw diame...

            No price
            Poland
          • 1996 Ferromatik K 320 S

            • Manufacturer: Ferromatik
            • Screw Diameter: 70 mm
            • Clamping Force: 4500 kN

            Ferromatik k 320 s used machine make: remote romatic milacron type: k 320s year of construction: 1996 machine number: 560033 control: location: poland country of origin: germany technical data screw diameter: 70 ...

            No price
            Poland
          • 2003 FERROMATIK K-TEC 175S/2F

            • Manufacturer: K-Tec

              Ferromatik k-tec 175s/2f injection molding machine two components parallel injection units - 25mmm/18mm. rotating table, caco pacific . extras: two core pullers, central lubrication system by-pass oil filter exte...

              No price
              Poland
            • 1995 Ferromatik 140 tn Plastic injection machines

              • Manufacturer: Ferromatik

                Plastic injection machines ferromatik 140 tn used machine ferromatik 140 tn, new in 1995, screw 50 mm, between tie bars 450x450, good working condition

                No price
                Spain
              • 1991 Klöckner Ferromatik FX50

                • Manufacturer: Klöckner

                  Closing force: 500kn, opening stroke: 350mm, screw diameter: 30mm, beam width: 353x353mm, mounting height min/max: 200/550mm, platen size: 540x540mm. operating hours: ca. 555000h.

                  No price
                  Berlin, Germany
                • 2005 FERROMATIK-MILACRON K-Tec 200-1000 S 1022-H07894

                  • Manufacturer: K-Tec

                    Screw size:60 mm injection shot weight in polysterol:540 g clamping force:2000 kn injection unit: screw size:60 mm max. swept volumne:636 cm³ injection shot weight in polysterol:540 g/ps injection pressure:1.575 ...

                    No price
                    Düsseldorf, Germany
                  • 1995 Ferromatik Milacron FM 175/200 2F Injection molding machines

                    • Manufacturer: Ferromatik Milacron
                    • Clamping Force: 200 kN

                    Injection molding machines ferromatik milacron fm 175/200 2f used machine year: 1995 controller: iqt 6 technical data clamping force: 200 kn dist. betw. tiebars: 520 x 520 mm platen size: mould hight: min 350 mm ...

                    No price
                    Łódź, Poland