• 24" Solberga Geared Head Drill Press

    No price - Farmingdale, NY Recently Added
    • Manufacturer: Solberga
    • Capacity: 1.75"

    motor: 2-hp | spindle travel: 7.785" | depth of throat: 13" | spindle diameter: 3.125" | spindle feeds (4): .004/.008/.012/.016 ipr | spindle speeds (8): 48-1584 rpm | distance spindle to base: 35...

  • 60 Ton, BLISS, MODEL C60, 4" STROKE, BACK GEARED PUNCH PRESS

    No price - Ringwood, NJ
    • Manufacturer: Bliss

    specifications tonnage rating 60 ton type of clutch/brake air stroke 4" slide adj. 3" bolster dimensions 32" l-r x 21" f-b bolster thickness 3" shutheight on bed 18" motor specifications 240/460/3/...

  • 1991 WILTON (ARBOGA) GEARED HEAD 20" SINGLE SPINDLE

    No price - Cleveland, OH
    • Manufacturer: WILTON

    equipped with: (arboga) geared head made in sweden pedestal type 20" swing 5" spindle travel drill chuck 18" x 24 3/4" t-slotted swivel table geared head with 8 spindle speeds 120 - 1640 r.p.m. spi...

  • 1995 CLAUSING COLCHESTER 8043 ENGINE LATHE STRAIGHT BED, GEARED HEAD 16 SPEED, 15″ X 50″

    $13,500 - Bethlehem, PA
    • Manufacturer: Clausing
    • Spindle Nose: D1-6

    specifications swing over bed: 15.7″ swing over cross slide: 9.7″ center distance: 50″ bed width: 12.5″ headstock spindle nose: d1-6 spindle through hole: 2.125″ spindle speeds (16): 25-2000 rpm sp...

  • 2006 CLAUSING COLCHESTER 8043V ENGINE LATHE 16-SPEED GAP BED, GEARED HEAD WITH NEWALL 2-AXIS DIGITAL READOUT, 15″ X 50″

    $15,950 - Bethlehem, PA
    • Manufacturer: Clausing
    • Spindle Nose: D1-6

    specifications swing over bed: 15.7″ swing over cross slide: 9.7″ center distance: 50″ bed width: 12.5″ swing in gap: 23″ headstock spindle nose: d1-6 spindle through hole: 2.125″ spindle speeds (1...

  • SOLBERGA SE1735 GH SINGLE SPDL DRILL GEARED HEAD SPINDLE 24″

    $3,450 - Bethlehem, PA
    • Manufacturer: SOLBERGA
    • Capacity: 1-1/2″
    • Weight: 1,000 LBS

    specifications drills to center of circle: 24″ drilling capacity in cast iron: 1-1/2″ drilling capacity in mild steel: 1″ spindle travel: 6″ spindle taper: no. 3 mt low spindle speeds: 60, 160, 260...

  • 13257 30" ALZMETALL GEARED HEAD DRILL AB5/S

    $3,950 - York, PA
    • Manufacturer: Alzmetall

    30" alzmetall geared head drill press price: loaded on truck, our warehouse, york, pa …… $3,950.00 stock # 13257 serial # 1953 year built 19h (yes 19h) model # ab5/s spindle speeds: 48 to 960 rpm...

  • SOLBERGA NY2035/SE2035 MULTI SPDL DRILL SE2035 2-SPINDLE GEARED HEAD PRESS, 25″

    $3,650 - Bethlehem, PA
    • Manufacturer: SOLBERGA
    • Capacity: 1.4″

    specifications drills to the center of circle: 25″ drilling capacity, mild steel: 1.4″ spindle travel: 6″ quill diameter: 2-7/16″ spindle taper: 4mt spindle speeds (8): 90 – 3,160 rpm maximum dista...

  • Solberga SE1235 24" GEARED HEAD PRESS

    No price - Holland, OH
    • Manufacturer: Solberga
    • Capacity: 1-3/4"

    serial ............................. 711 model .............................. se1235 depth of throat .................... 13" drilling capacity (cast iron) ...... 1-3/4" drilling capacity (mild ste...

  • 1993 SUPERMAX MAX-8 VMC GEARED HEAD VERTICAL MACHINING CENTER WITH FANUC OM CONTROL, 65″ X 27.6″ X 27.6″

    $34,900 - Bethlehem, PA
    • Manufacturer: Supermax
    • Spindle Taper: CT-50

    specifications spindle spindle speed: 4000 rpm spindle taper: ct-50 front bearing diameter: 3.94″ travel x-travel: 65″ y-travel: 27.5″ z-travel: 27.5″ distance between spindle nose and table top: 7...