• 1997 GEKA 110/A

    • Manufacturer: Geka
      No price
      Ephrata, PA, USA
    • 10000 Lbs/hr Geka Steam Boiler #214816

      • Manufacturer: Geka

        10,000 lbs/hr, high pressure vertical natural circulation boiler. manufactured by geka, serial # 400016. type nuk hp 2550. national board # 23. down flow model. rated at 10 mmbtu/hr, with a normal operating press...

        No price
        West Windsor Township, NJ, USA
      • 10000 Lbs/hr Geka Steam Boiler #214817

        • Manufacturer: Geka

          10,000 lbs/hr, high pressure vertical natural circulation boiler. manufactured by geka, serial # 400019. type nuk hp 2550. national board # 24. down flow model. rated at 10 mmbtu/hr, with a normal operating press...

          No price
          West Windsor Township, NJ, USA
        • Geka Hydraulic Ironworker #2990

          • Manufacturer: Geka

            used geka hydraulic ironworker model hydracrop 80s specifications: 88 ton punching capacity (1-1/4" round thru 3/4" mild) 12" throat depth 5" x 5" x 1/2" angle shear capacity 18" length x 5/8" thickness flat she...

            No price
            Ronkonkoma, NY, USA
          • 1982 GEKA HYDRACROP 100A HYD IRONWORKER TK-19769

            • Manufacturer: Geka

              round bar: 2″ square bar: 2″ flats (non deformation system): 24” x 5/8” or 16” x ¾” or 12” x 1 length of blades: 24” capacity: 110 ton punching capacity: 1-1/4” in 1” throat depth: 12” thickness: 1/2” depth: 3-1/...

              $19,500
              Bethlehem, PA, USA
            • Geka Hydraulic Ironworker #2282

              • Manufacturer: Geka

                used geka hydraulic ironworker model hydracrop 100sd - deep throat 110 ton punching capacity (1-1/4" round thru 1" mild) 24" throat depth 6" x 6" x 1/2" angle shear capacity 24" length x 5/8" and 12" x 1" flat s...

                No price
                Ronkonkoma, NY, USA
              • Geka HYD-100 100 TON HYDRAULIC IRONWORKER

                • Manufacturer: Geka
                • Capacity: 100 TON

                serial .......................... 14127 model ........................... hyd-100 capacity ........................ 100 ton punching capacity ............... 1-13/16" x 1" depth of throat ................. 12" st...

                No price
                Holland, OH, USA
              • 2002 Geka Hydraulic Punch Machine #2620

                • Manufacturer: Geka
                • Capacity: 185 Ton

                geka hydraulic punch machine model puma-165 new 2002 - very limited use capacity .................... 185 ton punching ............. 1-1/2" round thru 1-1/2" steel throat depth ................ 20" motor .........

                No price
                Ronkonkoma, NY, USA
              • GEKA Hydracrop 80SD Ironworker (2012)

                • Manufacturer: Geminis

                  with the following capacities in mild steel: angle shear: "non-deform cut" with no material loss angles square - 5" x 5" x 1/2" or 6" x 4" x 1/2" angles on 45 degree mitre (leg in) - 3" x 3" x 5/16" bar shear: ro...

                  No price
                  Altamonte Springs, FL, USA
                • Geka Hydraulic Ironworker #1090

                  • Manufacturer: Geka
                  • Model: MINICROP

                    new geka hydraulic ironworker model minicrop 50 ton punching capacity (1-1/16" round thru 1/2" mild) 6-7/8" throat depth 4" x 4" x 3/8" angle shear capacity (slight deformation) 3" x 3" x 5/16" angle shear capac...

                    No price
                    Ronkonkoma, NY, USA