Used gidding lewis

- 474 listings found
Sort by Price: Low to High | High to Low
  • Giddings & Lewis Outboard Support (Tailstock)

    • Manufacturer: Giddings & Lewis

      hole diameter: 3.75″ | overall depth: 13″ | overall width: 36″ | overall height: 84″ | overall weight: 1,300 lbs. | width way surface: 6″ | overall width of way surface: 30″ | vertical travel of bearing support:...

      No price
      Spencer, MA, USA
    • 36″ Giddings & Lewis Facing Head Davis

      • Manufacturer: Giddings & Lewis

        Drive ring boring bar & holder feeds: 0.0029 / .039 ipr | diameter: 36″ | hold diameter: 6″ | weight (approx.): 1,800 lbs | bolt hole spacing: 6″ | max. facing diameter: 48″ | tool slide cross travel: 12″

        No price
        Spencer, MA, USA
      • GIDDINGS & LEWIS CNC FRASER HORIZONTAL BORING MILL

        • Manufacturer: Giddings & Lewis

          5" spindle diameter g & l "numeripoint" m-400 control with crt on pendant - manual control #50 taper w/power draw bar pendant control spindle speeds 6 to 1120 rpm feeds- 0.0492 in -139.76 ipm head travel - 72" t...

          No price
          Cleveland, OH, USA
        • Giddings & Lewis Cast Iron 27646

          • Manufacturer: Giddings & Lewis

            T-slotted leveler/ anchors 1.5" x 2.75" x 3.25" deep t-slots

            No price
            Melville, NY, USA
          • 1974 Giddings & Lewis Hydrostatic 27645

            • Manufacturer: Giddings & Lewis
            • Capacity: 75,000 LBS
            • Weight: 32,700 LBS

            75,000 lb load capacity 4-positive shot pin locations 90 degree positioning 4-shot pin positions fixture locating keyway power clamping centerbore in table platen

            No price
            Melville, NY, USA
          • Gidding & Lewis G 60-FX

            • Manufacturer: Giddings & Lewis
            • Spindle Diameter: 6"

            60 tool atc in feed table with 84" travel way covers misc tooling

            No price
            Smyrna, TN, USA
          • Giddings & Lewis 70-H-6T

            • Manufacturer: Giddings & Lewis
            • Spindle Diameter: 6"

            Cogsdill 5 axis contouring head 60" x 60" cincinnati gilbert airlift rotary table power draw bar hard removal ways 3 pcs, 30" x 48" 8" 90 degree fixtures 3 pcs 37" x 72" x 12" 90 degree fixtures (2) 8" face mills...

            No price
            Smyrna, TN, USA
          • Giddings & Lewis Winslowmatic 100C 941-0297-93

            • Manufacturer: Giddings & Lewis

              condition info: excellent | wheel dressing: automatic (after a selectable number of drills have been ground) | sharpening rate: 500 units per hour | concentricity (tir): 0.0005 in 0.013 mm | point angle maximum:...

              No price
              Washington, PA, USA
            • 1982 Giddings & Lewis 987-15HS Traveling Column

              • Manufacturer: Giddings & Lewis
              • Spindle Taper: Cat 50 V Flange
              • Control: Existing G & L 800

              2 - 22" diameter rotary tables built into pallet ways: hardened ways | power: 3ph / 60 hz / 440v | control: existing g & l 800 | coolant: yes | pallet width: 25.00 in 635.00 mm | pallet length: 84.00 in 2133.60 m...

              No price
              Washington, PA, USA
            • 4", GIDDINGS & LEWIS 340-T, 54" VERT., 60" CROSS, 72" SADDLE, 3-AXIS DRO

              • Manufacturer: Giddings & Lewis

                Specifications: model 340-t serial 7298 year 1952 spindle diameter...................... 4" spindle taper......................... no. 5 morse taper 40 pdq quick change adapter spindle speeds...

                No price
                Bedford, OH, USA