• Everseiko Intelligent Pump Everseiko 301-S Grace HPLC Pump Phenomenex HPLC Pump

        everseiko intelligent pump everseiko 301-s grace hplc pump phenomenex hplc pump used nice

        No price
        Manasquan, NJ, USA
      • 1984 Dean, Smith, & Grace 25P 23796

        • Manufacturer: Dean, Smith, & Grace
        • Distance between Centers: 118.11"

        10.5" spindle bore diameter gap bed front & rear mounted chuck 2-25" 4-jaw chucks mounted front & rear mounted 4-way tool post inch/metric threading taper turning attachment 3-steady rests (10",14.5",17") hardene...

        No price
        Melville, NY, USA
      • Grace 30 TFC 60 CU. FT. 2 COMPARTMENT PADDLE BLENDER – S/S – 5 HP

        • Manufacturer: Grace

          1 – used grace 60 cu. ft. 2 compartment paddle blender. stainless steel construction. each compartment is approx. 30 cu. ft. and imeasures approx. 57 in. long x 41 in. wide x 47 in. deep and has an approx. 3 in. ...

          No price
          Twinsburg, OH, USA
        • Dean Smith & Grace 1307

          • Manufacturer: Dean Smith & Grace
          • Spindle Bore: 52 mm

          dean smith & grace 1307 x 40 gap bed lathe, serial no 41502-12-80, swing over bed 370mm, swing over saddle 180mm, swing in gap 540mm, spindle speeds 29 – 1600rpm, feeds sliding 0.4 – 1.12mm/rev, surfacing 0.2 – 0...

          No price
          United Kingdom
        • Dean Smith and Grace Type 36XS Gap Bed Lathe

              code: st2722 dean smith and grace type 36xs gap bed lathe model: 36 xsserial number: 40874-4-77swing over bed: 965mm (38”)swing over saddle: 660mm (26”)distance between centres: 3000mm (120”)swing in gap: 1372mm ...

              No price
              Motherwell, United Kingdom
            • Dean Smith & Grace 1910 x 90 3621

                • Spindle Nose: D 1-8

                serial no. 39490-11-72 swing over bed: 19″ swing over cross-slide: 10″ distance between centres: 90″ spindle hole: 3.75″ spindle nose fitting: d 1-8 speed range: 8-1400 or 2500 rpm no. spindle speed: 12 tailstock...

                No price
                Shildon, United Kingdom
              • Dean Smith & Grace T21 x 48 3259

                  • Spindle Bore: 3 1/2″
                  • Distance between Centers: 48″

                  distance between centers: 48″ swing over bed: 21″ swing over cross-slide: 12″ spindle speeds: 7.5 to 600 (18) spindle bore: 3 1/2″ execution: imperial tool post: 4 way 3 jaw chuck main motor:12.5 hp approx dimens...

                  No price
                  Shildon, United Kingdom
                • Dean Smith & Grace 16SB

                  • Manufacturer: Dean Smith & Grace
                  • Spindle Bore: 42 mm

                  dean smith & grace type 16sb surfacing & boring lathe serial no: 37079 – 12 - 67 capacities: swing over bed: 500mm swing over saddle max. between centres: 640mm spindle bore: 42mm spindle speeds: 24.5 - 1000 rpm ...

                  No price
                  United Kingdom
                • 1971 DEAN SMITH & GRACE 30x216 32" x 216" / 813mm x 5486mm Lathe

                    • Spindle Bore: 4.5/8" / 118mm

                    dials: imperial | input: 380/440/3/50 ac 20 hp | width: 5'10" / 1.78m | height: 5'2" / 1.57m | length: 27'8" / 8.43m | bed type: vee/flat | equipment: fixed/travelling steadies, coolant | tool post: 4 way | tail...

                    No price
                    Leicester, United Kingdom
                  • 1977 DEAN SMITH & GRACE 1709x40 17" x 40" / 432mm x 1016mm Lathe

                      • Spindle Bore: 3" / 76mm

                      input: 415/3/50 ac 7.5 hp approx | width: 5' / 1.52m | height: 5'10" / 1.78m | length: 9'2" / 2.79m | bed type: vee/flat | equipment: hydraulic copying attachment | tool post: 4 way | tail stock: no. 5 morse tap...

                      No price
                      Leicester, United Kingdom

                    Have 5 seconds to help us improve the results?

                    I'll do it
                    No thanks